EFI Main relay

[smufguy]

Well, i thought about putting this on the efi section but its technical anyway. So here is what i was baffling around. I got 4 efi main relays at my pocession and two of em dont work right as in they work once in a while. What can i do to make them work again in good condition? The solders on the pc board seem fine. Thanks guys.

[shepherd79]

i don't think you can di anything to them, unless you want to rewind the coil.

[smufguy]

oh, so its the nasty coil that messes up huh? dag i thought carot found a way to solder and fix it or soemthing.

[carotman]

the solder only SEEMS to be fine.... check the How-to section (I'm too lazy to link ya)

Just resolder every connection on the PC board. The cold solver breaks over time and leaves a hairline crack hardly visible to the unaware eye.

They should work well again.

[AccordEpicenter]

yes, carotman is correct. Also i reccomend sucking the old solder off after heating it and then resoldering every joint on the board and make sure they arent cold joints

[smufguy]

oh cool, damn... we even have a section on the how-to-section??? dag carot, u rock.