Firewall ports

[3rdGenFanatic]

Could anyone please pinpoint through pic or description, locations for firewall ports that I can use to run wiring into the cabin. Thanks! :)

[neoblue89lxi]

I have one all the way to the right if your infront of the car looking at engine. It is only about an inch wide and closer to the top of the firewall. Mine could have been made for the alarm wires but check anyways.

[2old_honda]

there are holes on either sides of where the firewall meets the fenders. you will have to remove your fender lining to get the wire through.

[1988starter]

near the master cylinder.

[88 Accord DX]

Originally posted by 2old_honda
there are holes on either sides of where the firewall meets the fenders. you will have to remove your fender lining to get the wire through.

yes this one works but you dont have to take the fender off. i havent yet and i have alot of wires runnin through there.

[2old_honda]

Originally posted by 88 Accord DX
yes this one works but you dont have to take the fender off. i havent yet and i have alot of wires runnin through there.

i ment just the black plastic lining. but yeah if you are good, i am sure you could get wires through without removing the lining.