Need parts for B20A!

[b20a86lude]

ok guys iv been doing alot of reading and been asking i havent got any answers yet. So i was wondring if amyof yall can help please help this is what i need please refer me to where i can buy this stuff now or if it is the same and will fit from usdm b20a5
1, head gasket
2.header gasket
3.valve cover gasket
4.oil pan gasket
5.intake manifold gasket
6.timing belt
7.water pump
8.belt tensioner
9the gasket thAT GOES BETWEEN THE TRANSMISSON AND THE BLOCK
HELPPPPPPPPPPPPP
:sadwave:

:(
PLEAASE HELP ME I GOT THE MONEY I WANT TO BUY BUT I DONT KNOW WHERE TO BUY FROM CAUSE ALL THE PEOPLE I ASK IF I CAN BUY DONT RESPOND

[Justin86]

Have you checked with a dealer or local part stores. The US anf JDM I belive are the same except for some little things. Different compression, fuel map, stuff like that. I'n not to fimular with these engines so I'm not 100% sure. Just like the A20a1 and A20a3. They have there differences but they have the same bases and almost everything is interchangable.

[88LXI]

ok.... there is no gasket from the block to tranny.... the tensioner is the same as b20a5.... the water pump from the b20a5 is very similar to the b20a but i think it has a on tooth smaller cog on it than the jdm one... timing belt is jdm only there is no cross reference so you will have to get it from japan.... intake gasket is the same as the a20a3.... pan, SORRY i dont know.... valve cover gasket is the same as b20a5.... the exhaust flange gasket is very close to the b20a5 and can be cobbled to fit.... head gasket, SORRY i dont know.......

hope i helped a little

[b20a86lude]

Ok i want to knwo if anyone knows about this if i mix a jdm belt

tensioner and usdm water pump or reverse and a usdm sprocket

and usdm cam gears will the jdm timing belt Fitt :werd:


oh and one good question just so confused im going to order soon as i knwo the correct answer for this i got the 86 integra advANCED DISTRUBUTOR AND I WANT PERFORMANCE IGNTION WIRES WHICH ONES DO I GET THANKS PEACE :huh:

[carotman]

The pump from the B20A3 is the same (sohc Lude)

[88LXI]

thanx carot :)

[L3G10N]

you can get the original water pump of the b20a at your honda dealer. I can have it here in Montreal/quebec. 70$can + tx

I've checked the pump and it'S the PH3, exactly the same than was on my b20a!