The answer to an easy 20hp!!!! check this out

[thundertank]

Check out what I found!!!!





:bow:


http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6763&item=2427760069

[deadlight]

Nice, cheap too, but why wouldn't it work for 86-88 FI cars?

[Mike's89AccordLX]

I highly doubt this will give you 20 hp. Even if it could work you would need to dyno tune it for best results. But I doubt it will do anything but weigh the car down with a few extra ounces.

[87accordlxi]

:BS:

[4DoorAccordDX]

20hp? That thing must come with a shit load of stickers. :lol

2-Knee

[pimp86LX]

Im gunna slap one on my 86-LX :flipa:

[1988starter]

Hey look it is a resistor that you lug into your intake temp sensor so it advances your timing.

[johnwc723]

yeah dude just go to radioshack and buy a 4.7k ohm resistor thats all it is, i just did it, and i have it on a switch too normal one way, and resisted the other way (on the intake temp sensor, on the far right of the FI body) so i can be either fuel efficient or fast, have yet to determine wheter it makes a difference or not though, but dont SPEND 15$ on it, it really is just a 10cent resistor

[pimp86LX]

hmm Someone should get a dyno run with the resistor in place.....

[‹^› ‹(•¿•)› ‹^›]

http://www.hondahookup.com/phpBB2/images/smiles/bs.gif

[Vinny]

:werd:

[adams86lxi]

why does he have a picture of his car and not the chip? im calling this bs:cool:

[OldSchoolSwap]

Watch out guys, "It is clinically proven" :lol

[Vinny]

yeah clinically proven by the US department of Agriculture as pure UDSA http://www.hondahookup.com/phpBB2/images/smiles/bs.gif

[hondamanlxi]

since it clinically proven, it better get rid of these damn gential warts too!

hahahah ive been saving that one!

This has been discussed a million times! NOT WORTH A F#*K!

[thundertank]

hey i was being sarcastic! i just saw this last night and thaught it was some funny shit! hahaha:flipa:

[toastyghost]

Yeah, whatever. There is a 3.4 DOHC chip that has been dyno proven +27hp/+19tq but that is for a relatively technologically advanced domestic V6, not a foreign 12-valve 4-banger. I also call bullshit on the range of years not beginning at the start of an actual generation of Accords. It's remotely possible they're referring to 8/89 meaning the earliest 4g though.

[thundertank]

well yeah maybe but this one is complete BS!!

[pimp86LX]

Originally posted by toastyghost
Yeah, whatever. There is a 3.4 DOHC chip that has been dyno proven +27hp/+19tq but that is for a relatively technologically advanced domestic V6, not a foreign 12-valve 4-banger. I also call bullshit on the range of years not beginning at the start of an actual generation of Accords. It's remotely possible they're referring to 8/89 meaning the earliest 4g though.

you have a z34! sweet man. Those DOHC 3.4L engines are nice and quick. Check out www.w-body.com Our cars (buicks,luminas and prixs) are all built onthe same platform :wave:

[Justin86]

Originally posted by ‹^› ‹(•¿•)› ‹^›
http://www.hondahookup.com/phpBB2/images/smiles/bs.gif
I couldn't agree any more.

[dXsquared]

Originally posted by pimp86LX
you have a z34! sweet man. Those DOHC 3.4L engines are nice and quick. Check out www.w-body.com Our cars (buicks,luminas and prixs) are all built onthe same platform :wave:

that means my mom has a W body!

1993 Grand Prix SE Coupe
3.1 Liter V6
4 speed automatic
stupid ass rear suspension.. no drop for her
Travis

[pimp86LX]

yes she does!

You can drop the rear, its got a monoleaf setup but you can swap it all out for coilovers. :D Theres also a company that makes lowering mono-leafs

[Busted_Blue]

...gotta love these products that f* us over.

[Morpheus]

"Clinically proven and totally safe."

:lol:lol:lol:lol:lol:lol:lol:lol:lol

[Swan]

hey john, when ya gonna find out if it makes a difference? also, have you seen the perf. chip on nopionline.com? its like a hundred bucks or something...I looked at it a long time ago.... like, ya send them a part to have it welded on, andt ehy send it back to ya..... its suposed to improve the performance of all your aftermarket parts... I duno, could someone with money look into it? i would, but I"m flat broke...I can't get anything else until I get my MSD and blaster 2 coil paid for... boss-man at work is letting me pay so much a week :) but I have to pay something like 260 total...

[Justin86]

Man another old thread brought up from the dead.

[toastyghost]

Originally posted by pimp86LX
you have a z34! sweet man. Those DOHC 3.4L engines are nice and quick. Check out www.w-body.com Our cars (buicks,luminas and prixs) are all built onthe same platform :wave:

Hell yeah! I've been on that board for a while though I don't post too often. I was also on EFI Street before it shut down. W-bodies rule. What's your name on the w-body forum?

Also btw have you seen Tim's turbo thread? I forget his name on the board but he has a turbo setup that Shane (RedZMonte) made and is going to start selling as a kit. He said he's been smoking 5.0's like nobody's business on 5-6 psi non-I/C.

[pimp86LX]

my name on w-body is Panopticon

I havn't been on there in ages though, my buick needs a new ABS master cyl. and its like $4000 from GM so i'm beating the 3g until that dies and saving up for the buick.
I havn't seen the turbo thread. I have plans for the 3.8 though. :D its gunna cost mabe $10-12k CAD for a Tuned-L67 swap :D

[K DASH]

To quote the one negative feedback this auctioner got

"Complaint : Stay away, rip off, sent envelope with no chip just instructions. u sukkkkk"

Haha, I really wonder what the instructions said...

[pimp86LX]

Originally posted by K DASH
Haha, I really wonder what the instructions said...

it said

PWNED!!

[Justin86]

It said thanks for the money! :flipa:
:stupid: