PDA

View Full Version : honda ATF for Rebuilt Non honda internals



PogiLXI
08-17-2003, 10:49 PM
ok, I got a few questions. honda ATF fluid is for Factory Honda Trannys right? what if it is Rebuilt using BM parts? Still use Honda ATF??? Im not sure if it was rebuilt using Honda OEM parts. or is honda the only place you can get a rebuild kit from?


Im probly going to use honda ATF anyway. How much is that From Satan?

PogiLXI
08-18-2003, 07:41 AM
TTT

wprocomp
08-18-2003, 12:52 PM
umm...yeah you can use whatever you want..B&M tranny fluid is pricey but good...go the extra mile and buy some royal purple tranny fluid...thats some baaaddd stuff

PogiLXI
08-18-2003, 03:09 PM
Still havent Answerd my question.

A20A1
08-18-2003, 05:22 PM
I don't know Honda's price for their fluid.

I've been fine with Mobile 1 ATF and a bottle of B&M trick shift...
Though who knows if I'm loosing any power... I don't think using hondas fluid would be that big of a difference.

BTW where did you buy a B&M rebuild kit for the Transmission?

PogiLXI
08-18-2003, 05:31 PM
I didnt Buy it. The people that Rebuilt my Trannys. I belive they used B&M products.

A20A1
08-18-2003, 06:03 PM
*Get four bottles of B&M Trick Shift FREE when you buy a B&M
Transmission Cooler! The Trick Shift`s worth a cool $15.80.

- Summit Racing

Just thought I'd let you know.

PogiLXI
08-18-2003, 08:21 PM
hmm, I dont know If I have any use for the Tranny cooler, I thought our trannys already had a cooler.

A20A1
08-18-2003, 08:45 PM
Yeah, the stock cooler is a skinny pipe that runs thru the bottom of the radiator... I think that was a bad idea... but oh well.

PogiLXI
08-18-2003, 09:10 PM
AHHH I see. If I put a Tranny cooler, Will It need a inline pump???

A20A1
08-18-2003, 09:43 PM
nope... just pull off one of the transmission lines from the radiator... possible the one closest to the passenger side since you'll need less hose to reach it... connect one hose from the radiator to the cooler and the other from the cooler to the transmission.

Sometimes they give you a smaller diameter hose then the size you need and you'll have a really hard time sliding the hoses on the hard lines, I don't know what size hose you need for the transmission though.

right now I'm running 2 B&M coolers without the stock cooler... but one of the coolers is fan assisted, since I leave my radiator fan always running.

I'm not sayin go out and buy one... but if you're willing to lay down $50 bucks for a cooler then go for it, just cause you get some free trick shift to go with it.

PogiLXI
08-19-2003, 12:34 PM
got photos on where you put the coolerS?