PDA

View Full Version : o2 sensor question


NOAHS88accord
08-26-2003, 06:01 AM
EFI has 2 sensors right? Carb has 1 right? well I have a carb, so can I get the header for the EFI, and put 2 o2 sensors in there and then use one for the required one, and one for a A/F gauge? will this work.


I know I know noob question.

Noah
Dibbs
08-26-2003, 06:15 AM
My '86 EFI has one O2 sensor. Shouldn't be a problem.
smufguy
08-26-2003, 06:21 AM
The carb header has two outlets for ur EGR and your Air suction.

The efi header has only one outlet for ur EGR. So the EFI header wont work on ur Carb car if u have a stock carb setup.
NOAHS88accord
08-26-2003, 06:44 AM
so how do I get the A/F gauge to work?
yaxley
08-26-2003, 06:52 AM
Your o2 sencer should only have one wire coming from it you just conect your o2 sencer wire to it with an inline splice.
NOAHS88accord
08-26-2003, 08:46 AM
cool thanks
BootMachine
08-26-2003, 09:32 AM
YES

Keep in mind that the oxygen sensors in our cars are crap anyway. The resolution on them is garbage. The voltage output "floats" a lot even when not sensing anything but under power.

If you want to go one better "LAMBDA" has an O2 sensor out that works in real time and has high resolution...Its more than 1000$!

Unless you are running 40 PSI and 200 shot......your stock sensor should be fine!