PDA

View Full Version : Blew a fuse...NEED HELP



89AcCOrDmike
09-10-2003, 02:57 PM
okay i was working on the 94 today(sorry if this should be in off topic) and i was replacing the dome light and side lights on the doors because they were all out, but i did the stupidest thing and for some reason spaced out on disconnecting the battery, so all the sudden as soon as i touch the light they all go out, after calling myself a few stupid names i went to see what fuse i blew, but i just can't figure out which one it is....i've never delt with fuses before, so if anyone could give me a hint on what fuse is for domelights and doorlights i would really appreciate it, every other light seems to work fine, i just can't figure out which one is blown! thanks!:wave:

89AcCOrDmike
09-10-2003, 03:23 PM
bump

Vinny
09-10-2003, 04:17 PM
tryin to find something for ya, doesn't that thing have an owners manual??????

TJ89Accord
09-10-2003, 05:09 PM
It should be labeled on the fuse box. Just pull them out and look to see if it is blown. You can tell if it is. And there is probably a fuse box under the hood too...

good luck.

tim

zero.counter
09-10-2003, 05:15 PM
Run the basics, check all fuses one at a time. Then move to checking the current on the lines to the lights with a volt-meter.

89AcCOrDmike
09-10-2003, 05:34 PM
thanks guys i found it!.....i thought it would be inside the car but it was actually the box under the hood, went down to autozone and picked up a new 5 pack for a buck fifty, thanks for all the replies!

TJ89Accord
09-10-2003, 06:07 PM
yay I helped :) lol