PDA

View Full Version : ATTN: anybody with an adjustable feul pressure regulator



rallyeNate
05-01-2002, 12:53 PM
what kind of adjustable feul pressure regulator? namebrand....most importantly is it a 2port or 3port and which side of the feul rail did you mount it feed or return?

anchovies
05-01-2002, 01:59 PM
i think turbo accord has something on this on his web site

PhydeauX
05-01-2002, 04:17 PM
I'm not 100% sure on this but isnt it the b&m one that requires you to cut the top off your old regualtor and replace it with the new b&m piece. It uses the stock fuel rail and lines.

andy

88turboaccord
05-01-2002, 06:05 PM
You can use either the AEM style one, or the vortech or the B&M, but it requires you to do a little modifications. I have a how to on them on my website, or I can make it for you---ready to bolt on for $85..

Sabz5150
05-02-2002, 04:59 AM
Justin -

What stock regulator do you use for your Vortechs? I have one, and I can't find ANY 3g's with a regulator small enough to fit it.

-5150 http://www.automotiveforums.com/vbulletin/images/smilies/bandit.gif

88turboaccord
05-02-2002, 07:42 AM
Look on my how-to section for adjustable fuel regulators---

Here I will even make it easy for you:

(Just click the link below:bh:

http://88turboaccord.net/installations/fuel/

Sabz5150
05-02-2002, 09:47 AM
I followed the howto, but the prolem that I'm running into is that the stock regulator is too large of a diameter for the Vortech to fit.

To make a long story short...

http://88turboaccord.net/installations/fuel/img18.jpg

That won't fit INTO the Vortech FPR.

-5150 :bandit:

88LXiHB
05-02-2002, 09:55 AM
Does the part # on yours match the one on Justin's page??

Sabz5150
05-02-2002, 10:40 AM
Yep. The only difference is mine is purple.

-5150 :bandit:

88turboaccord
05-02-2002, 02:01 PM
It is a stock fuel regulator---any hOnda works, even ours, you are not doing something right...

Sabz5150
05-02-2002, 04:39 PM
I followed the instructions, cutting the top off the regulator... it's that the bottom half won't fit into the top of the Vortech... it's too big around. Do you need to grind down part of the bottom so that it'll fit? :confused:

-5150 :bandit:

TWOLOUDNPROUD
12-24-2005, 10:22 PM
It took me 15min's to put my adjustable feul pressure regulator in and that cutting it to. http://memimage.cardomain.net/member_images/11/web/359000-359999/359877_149_full.jpg