PDA

View Full Version : 86-89 Accord Wireing for Alarm



TWOLOUDNPROUD
10-25-2003, 03:02 PM
http://images.cardomain.com/member_images/11/web/359000-359999/359877_24_full.jpg

POS carb
11-04-2003, 09:17 AM
i'll look over that when I get a chance, it is a pain in the ass wiring the door trips b/c of the fact that there are 5 individual circuits (that little what-door-is-open display on the fuel gauge) and the alarm only has 1 input so wiring them all to this one point will render this gauge useless so I'm working on getting it to run off a dome lamp signal since all doors trip it and it's only 1 wire, that way any door that opens will trip the alarm.

alarm work is kind of a pain in the ass on this car. I also discovered that if you disconnect the blower motor and play with the flaps that conrol fresh/rec air then when you plug it back in it might work backwards (REC gives u fresh air and vice-versa) and lots of other little details you need to check for

TWOLOUDNPROUD
11-04-2003, 09:52 PM
The Black/white wire in the drivers kick panel will catch all the doors

lightbulblxi
11-15-2003, 11:14 PM
if u wire it to the domelight, will the alarm go off if ur in the car when it is off and turn on the light ffrom the switch?

TWOLOUDNPROUD
11-15-2003, 11:21 PM
Yes it will

POS carb
11-17-2003, 08:27 AM
no if you wire the domelight to be the trigger then it will only set it off if the alarm is armed

Justin86
11-17-2003, 05:35 PM
This is awesome cause I want to get an alarm and I know that Mario can use one.