PDA

View Full Version : Battery Terminals?



StUpiD8000
11-02-2003, 03:28 AM
Can Some help me find a terminal with one 4AWG, one 2AWG, and two 8AWG outputs?...I know their out there

shepherd79
11-02-2003, 03:49 AM
look here: http://www.sounddomain.com/shoplist~b~Lightning+Audio~t~Battery+Terminals
http://www.sounddomain.com/shoplist~b~Streetwires~t~Battery+Terminals
http://www.sounddomain.com/shoplist~b~Phoenix+Gold~t~Battery+Terminals
http://www.sounddomain.com/shoplist~b~Stinger~t~Battery+Terminals
why do you have so many wires?

StUpiD8000
11-02-2003, 12:04 PM
I need the 2awg for the stereo, the 4awg for the stock battery cabl, and the two 8s for all the stupid stuff I have on the car. fog-lights, neons, strobs, cooling system for the amps etc.




O ya I did see one in all those links...But thanks.....

PogiLXI
11-03-2003, 09:03 PM
I would keep any other Devices off the battery terminal thats hooked up to the Amp, it might cause an Electrical hum???

StUpiD8000
11-04-2003, 02:18 AM
couse their on the some terminal, or to much stuff?? I had this all befor on some Auto-Zone terminal. didnt hum but the amps where on a different terminal..top for car, side for amps...looks to takky

PogiLXI
11-04-2003, 04:14 PM
no, the way you had it was the best way in my opinon it keeps it from getting a Direct connection with the Alternator. So being on Sepret Termanals is better for ur Alternator. I have 4 12's with an orion Class D HCCA g4 at about 1\2 an ohm. thats a good 2000 Watts. and im pritty sure if I didnt have my Optima Gell Cell with my Car on one post, and my Amp on the other. my Alternator would have taken a HUGE shit a while ago.

Im saying, one Post with a Distriubutor on top of that post with a bunch of wires going to it. one big one for ur Amp and a bunch of small ones for whatever. I would Keep any Accessories off the Post ur Amp is on. ur amp is going to draw lots of power and those Accessories are Also going to take even more power. sooooooo

POS carb
11-12-2003, 08:47 AM
I have a VOODOO Car Audio terminal, 1 0/0 gauge output, 1 4 gauge, and 2 8 gauge outputs