bumper problem

[sxy86accord1]

my rear bumper is really loose...is there anyone that has had this problem and knows how to tighten it up. There is a pic on my website...
www.cardomain.com/id/sxy86accord1

thanks in advance for any help you can give me.

[danronian]

Not to be a smart ass but I always try the obvious. Look under the bumper and tighten all the bolts/nuts/screws that hold the thing on. After that you'll be able to find which bracket is loose. Then ask again how to fix the bracket and a picture then we can help you out. This is one of those things that can only be fixed by laying underneath the car and just look around.

[87accordlxph]

Hehe I took my rear bumper off to paint it and now it is held by the 3 screws on each corner of the car where the rear mudflaps are. Been like that for a while still intact but I'm getting water in my tails and thats' no good. I think some welding and new parts would fix that but shit that's alot of cash just to fix.

Good luck!

-Mike

[k-roy]

I drilled a few holes in the bottom of my tail lights to fix the water problem.