PDA

View Full Version : I have no EGR...Would Like Some Info !



BootMachine
11-25-2003, 10:47 AM
Check it out...here is a head off an A20A out of an 87 SI prelude.

http://www.slhondaparts.com/images/PCI/13SB00/021/5.jpg

This head has an EGR valve (I assume its the EGR valve) on the side of the head. How did this head get the EGR and why dont I have one!

No joke!! I dont have the entire piece on my head. Its like my head was made in a diff. sand cast. Actually I have 3 heads including a JDM head and NONE of them have the EGR valve!

Please shed a little light on this sitch!

I have a 1987 Prelude SI 2.0L NON-EGR

A20A1
11-25-2003, 10:54 AM
Different emissions requirements, Accord EX has the A20A2 and it doesn't have the same castings on the manifold as the A20A1

So you probably have an A20A4

Sabz5150
11-25-2003, 10:56 AM
Well, that's an intake manifold, but I know that's what you're talking about. I don't believe the JDM versions of the A series manifold had an EGR valve port on them.

Pics of manifolds please! :)

BootMachine
11-25-2003, 11:01 AM
I posted a pic of the manifold exploded view but in a few days I'll have pics of MY manifold up!

I hope drive clean knows my car does NOT come with an EGR and lowers my standards!

How can I ensure I dont fail my e-test because of this?