PDA

View Full Version : Some more pictures from today



88turboaccord
05-01-2002, 06:36 PM
http://88turboaccord.net/car/car%20in%20garage.JPG

This is the plexi-glass project that I am working on---believe me, The rear hatch lost a lot of weight with the glass removed...
I will have other pictures up when the project is complete in about 1 week..

http://88turboaccord.net/car/plexiwindow1.JPG

http://88turboaccord.net/car/plexiwindow2.JPG

The company that I am getting the material from, they have lexan, but it costs three times as much...

http://88turboaccord.net/car/motor20.JPG

MOTOR PIC....

carotman
05-01-2002, 06:40 PM
Hehe looks like Honda made the Glass for the car :)

That's a really good job.

You car wasn't fast nough huh??? heheh, I know it's never fast enough

PhydeauX
05-01-2002, 07:43 PM
Did you mold that yourself or have it done? Have you touched your bumpers yet, that'll loose you a bit of weight. I'm working on bringing over a bumper from australia for my nova, it has air passages that will be alot more friendly to my intercooler then the 5mph bumper it has now. The bumper literaly is just the plastic covering with some brackets to hold it to the car. Importing bumpers isn't fun, but maybe you could rig up some brackets to mount just your plastics and sell the guts for scrap. Probably loose close to 100lbs from that diet, won't do so good in a crash though.

andy

88turboaccord
05-01-2002, 08:29 PM
The front bumper is basically just the shell, the rear one, I have not gotten to yet, but I am getting there.. The plexiglass was just a 5X4 sheet, I cut it myself..

Vanilla Sky
05-01-2002, 09:38 PM
i would have went with lexan even if it is more... lexan has different properties, and will last a good bit longer and take more abuse than plexiglass

Derick

PhydeauX
05-01-2002, 10:25 PM
Did you have to heat it up and bend it any? I have been thinking about it on my nova for a bit, if a big sheet of lexan or plexi glass, a saw, and a heat gun will do the trick I think I might just try it.

andy

Sabz5150
05-02-2002, 05:02 AM
Justin, I know you were going for weight reduction, but I hate to tell you... pulling out the motor may make the car a lot lighter, but I'm guessing it's kinda needed ;)

-5150 :bandit:

Neuspeed87lx
05-02-2002, 07:26 AM
Very VERY nice!:super:

88turboaccord
05-02-2002, 07:45 AM
Dude--I pulled out the motor????:werd: Is That what the heavy thing in the front of the car was---I thought it had something to do with the A/C system or heating system...SHIT now I am screwed.....:crying:

DarknessRS
05-02-2002, 08:31 AM
Go for a custom CF hood :D
Then it will look like my favorite AE86.

You could always remove the rears seats for even less weight. Who needs passengers.

88LXiHB
05-02-2002, 08:37 AM
I bet those rims and tires are kinda heavy, you should take them off....























And instead of just letting them sit in you garage, sell them to me for...$400, just a thought...:D

88turboaccord
05-02-2002, 08:45 AM
http://88turboaccord.net/car/weight%20reduction2.JPG

smufguy
05-04-2002, 10:48 PM
turbo accord, u suck man. :( . you got a damn nice car and i dont. :( . could i please have your car? :)

Paul Aerodeck86
05-04-2002, 11:02 PM
TurboAccord, does you see something thru your plexi-glass window? In Aerodeck rear door weight about 50 kg (real heavy :-((, it's have 2 glasses - rear and skyview), and if plexi-glass is good choice, i will be replace it.

Sorry, for BAD ENGLISH. :-(

P.S. TurboAccord, when you buy APEXi REV/SPEED METER for preciously results of your acceleration? :-)

http://www.pauldesign.ru/photos/record.jpg

smufguy
05-05-2002, 09:02 AM
dotn be man, we understand ya. :) . some people wont even try but its awsome that u share your ideas. :) and gotta say, loveeeeeeeeeeee your car man. i love the one u used to have, your car with its fog/running lights on and on a red square or somewhere and it looked just awsome. do post those pics u taken on this new board. i wanna save it :)

Paul Aerodeck86
05-05-2002, 10:06 AM
Thanks, it's very pleased for me! :p
I have many projects, i will make another photoshopped bodykit soon.

About pictures, i have many of it, i love my car and i love photography, soon (as i hope) i finished my site, where you will can see all pictures. In this board i post only most beatuful (IMHO) photos of car...

Thanks again!

1989 DX R
05-05-2002, 07:36 PM
Paul, your photos of your car are like porn. :super:

Paul Aerodeck86
05-05-2002, 10:48 PM
What do you mean? :rant:

Bobs89LXi
05-06-2002, 03:00 AM
Originally posted by Paul Aerodeck86
What do you mean? :rant:

I do believe he means that the pics of your car excite him, make him drool, and want your car, just like those of a fine looking woman. :D

Paul Aerodeck86
05-06-2002, 03:22 AM
:smokin: :smokin: :smokin:

DrMunky
05-06-2002, 11:02 AM
Damn justin, you're hardcore into the weight reduction aren't ya? Are you going to cover your interior? Or just leave it bare-assed like that? Is there a lot of road noise like that?

DrMunky
05-06-2002, 11:05 AM
Hey Paul, do you think you could get into photoshop and make some pics of that body kit all the way around the car, and then send it to jetspeed.com.au?? They make custom body kits for any car... they might be able to hook us up with that kit :)

Guyver007
06-04-2002, 05:47 PM
Originally posted by DarknessRS
Go for a custom CF hood :D
Then it will look like my favorite AE86.

You could always remove the rears seats for even less weight. Who needs passengers.


Nahh man leave the seats, passangers are good cushion if you hit someone in revers or fall off a bridge backawards.. :D :stupid:

guaynabo89
06-04-2002, 06:29 PM
Are you planning to still drive your car on the street?

Are you just going to use the accord as a drag car?:cool:

88turboaccord
06-04-2002, 11:34 PM
damn old topic to bring up, the car is going to be a little of both....

Bullfrog
06-05-2002, 06:31 AM
question for you guys.......how much would that engine in that pic cost? and where is it from? thanks

smufguy
06-05-2002, 08:38 AM
The engine block is the stock A20A3. but the pistons are different and the intake manifold and the headers are all different and CUSTOM made. Justin sucks major time :D , cause he has a fast car. and he wont even give it to me for a drive :crying: