PDA

View Full Version : switching from 100mm to 114mm bolt pattern



88coupe
11-28-2003, 01:28 PM
I recently bought a 88 2dr. coupe with 59,000 original miles. It has the 13" factory alloy wheels with the black center. I'd like to up the wheel size, but with the 100mm pattern I think that limits me to a 14 x 6 factory wheel. Is there a way to swap out the front rotors/hubs and rear drum/hubs to the 114mm size from a 90 and up Accord? That would enable me to use a 15" factory wheel. Or is there a way to swap out the above parts to the newer 5 lug pattern? Which would enable me use the 16" or even 17" factory wheel. There is plenty of newer Accords in a local wrecking yard, with the factory rear discs, and related parts to do the swap (master cylinder, lines etc...). Any help would be much appreciated if anyone has attempted this swap. I could always go to the aftermarket but would prefer factory stuff. Thanks for any input.

shepherd79
11-28-2003, 02:13 PM
why don't you use 2002 civic wheels. they are 16" and they are alloy. plus they are 4x100

NXRacer
11-28-2003, 02:27 PM
there are plenty of wheels that are 4x100 that will fit

k-roy
11-28-2003, 02:51 PM
Welcome to the board man
I don't think anyone has ever done it. It would be a lot of work for little payoff. One thing is the hole in the spindels. It is bigger on the newer models so on top of fitting the spindles you would need custom axles. Civic wheels will work just fine.

As for rear discs you can swap them form a 88 or 89 Accord SEi. The rear discs are the same as a 2nd gen integra. The discs and calipers are the same, but you will need some suspension pieces from the SEi. Check out the howto section, the brake swap is listed there.

88coupe
11-28-2003, 05:29 PM
Shepard79

Do you have any pics of the 02 Civic wheels? thanks for the tip.

k-roy
11-28-2003, 05:39 PM
http://i23.ebayimg.com/02/i/00/f8/f0/68_1.JPG
http://i12.ebayimg.com/02/i/00/f8/f1/9e_1.JPG
http://i18.ebayimg.com/01/i/00/f8/81/ce_1.JPG
http://i20.ebayimg.com/01/i/00/f8/e4/ba_1.JPG

These are all going for $400-$450 a set on ebay. Do a serch for OE Civic Wheels.

I personally like the third one.

88coupe
11-28-2003, 05:48 PM
thanks kroy, heading to ebay right now to peer around.

dXsquared
11-28-2003, 05:51 PM
all of these bolt on...
1) http://figz.com/~deters/photos/icons/20020819-20020819%20001.jpg
http://www.cbwheels.com/images/karim%20si.jpg
2) http://www.obscureforums.com/rage/digicam/integra/IMG_1281.jpg
http://www.obscureforums.com/rage/digicam/integra/IMG_1283.jpg
3) http://www.hostilejava.com/Personal/aboutpersonal/Album/Car/IMG_2243.jpg
(the ones on the front of the black teg)


these are all factory wheels... plus there are the new Civic split spoke 5 spokes...

Travis

1=Civic SI wheels
2=GSR Blades
3=GSR Fat Five's

4sillypwr
11-28-2003, 06:10 PM
Yeah we have the same bolt pattern as the 88-91 civics/crxs.....bla bla bla. There is a long list of wheels that will bolt to our hubs.

-David