Show off the ideas you all gave me put to use. Thank you 3geez for everything 56k no

[neoblue89lxi]

I first want to say I love this site. The ideas you all have given me have brought life to my car. You all have been so helpful and I would like to show to everyone that has helped me what they have contributed for. Again thank you for everything. If anyone else needs help dealing with stuff I have done then please ask away.

Here are the foglights I got off ebay for 20 bucks and the lip spoiler from an 88 integra. I could not find another lip to add on 2 more inches but it looks fine as it is. One lip does look good.

http://images.cardomain.com/member_images/9/web/393000-393999/393638_53_full.jpg

http://images.cardomain.com/member_images/9/web/393000-393999/393638_54_full.jpg

http://images.cardomain.com/member_images/9/web/393000-393999/393638_55_full.jpg



Here is a pic off my rear disc brakes. Thanks to you I found out about this upgrade.

http://images.cardomain.com/member_images/9/web/393000-393999/393638_56_full.jpg

Cold Air Intake which is a moded 94-97 accord one. Didn't have to cut off any to fit it in. Just cut the top part in half and spun it around. The duck tape is where my bypass valve will go once it gets here.

http://images.cardomain.com/member_images/9/web/393000-393999/393638_57_full.jpg

Looking pretty for you all.

http://images.cardomain.com/member_images/9/web/393000-393999/393638_58_full.jpg

For the neon haters and lovers out there.

http://images.cardomain.com/member_images/9/web/393000-393999/393638_59_full.jpg

All I need now is a drop of a couple inches which I need to save money for to do it right.

[SteveDX89]

The car looks good. Many will ask about the intake. My question is how hard is disc brake conversion?

[Chris86Lxi]

Looks like you need to drop that slut. :D Still looks awesome though man, good job! props.

Chris

[NXRacer]

thats a really nice looking car. You need to drop that bad boy ASAP and it will be complete.

[johndej]

looks great man. another thing you could do would be to make some clear front turn signels. other then that i wouldn't change a thing

[neoblue89lxi]

The conversion seemed to be not that all hard. A master technician did it for me as a gift and it took him atleast 4 hours. He does own a shop so that probably wasn't completely devoted to my car. It does just bolt right on. I'm also using my lxi proportioning valve and it works great.

[easyryder]

Hey buddy That is one NNNNice lookn ride
the drop will look awesome!

[neoblue89lxi]

Thanks easy rider. How much of a drop you think it will need. !.75 2.00 or more? Should I lower the front more than rear or should that be the same?

[original2k]

how big are ur rims? like 16"s? well i say get a 1.75 it's low enough, oh yeah your car is awesome man, i love your intake, and i'm glad u find this site so helpful, cuz to be honest, alot of the boards out there don't have 1/2 the user support that we do, we're all about giving back to the community :D

[blazin3gen]

Looking good man!! I like the look of the fogs and the Neons, good work man!

[3rd GEN]

looks nice.. very clean.. i like
just needs a mad drop..

[k-roy]

Look at my Sig. That is VHT Nite-eyes tailight tint. I'll take a better pic tomorrow in the light.

[neoblue89lxi]

I like those tail lights kroy. Thank you so much for the compliments. I want to get projector headlights and I wondering if anyone would recommend a brand. I know old school has some listed from another company but those are just the housings. What bulbs would be the best to but in projector lights?

[Low Tek]

Love the look.. I would say go for a 2.25 in the rear, and a 2.5 in the front, makes it look more even with out haveing the gap in the front..
Like kroy said, you can tint the tail and sides.. that is always a nice look, and then just clear the fronts.. other then that, it looks good, REAL GOOD!
Glad you like the site too, I know I have been here for a bit and has been great!

[Justin86]

Well it looks like you have been having a lot of fun lately. I remember those days, then shit starts to brake. Looks like your engine is missing some paint on the valve cover and a header. :D

[neoblue89lxi]

I'll just peel the rest of the black off the valve cover and some day I'll get a header.

[G Man89]

Is that a 4cyl accord intake or a V6 accord intake?

[neoblue89lxi]

The 4 cylinder.

[HostileJava]

Looks good, drop it 2" though.

[BITESIZE]

Once again, lookin good!

[G Man89]

On a scale of 1 to 10; 1 being very easy and 10 being very hard; how difficult was it to install your cai? Any pointers?

[k-roy]

Originally posted by neoblue89lxi
I like those tail lights kroy. Thank you so much for the compliments. I want to get projector headlights and I wondering if anyone would recommend a brand. I know old school has some listed from another company but those are just the housings. What bulbs would be the best to but in projector lights?

Thanks man. The best $10 mod I have ever done. As for projectors by far the best bulbs are HIDs. Too bad it is a $500 kit. You can get H4 (very popular brighter bulb size) conversion and put your own bulbs in. Look for ones made out of glass, not plastic.
check out Paul's site http://www.pauldesign.ru
he has HIDs and nice light housings.

[neoblue89lxi]

The cai would be a 3 or 4 but it would be a 2 if I took the bumper off to do it. All you got to do is pull out your old intake stuff and your battery. Put in the new pipes but you might have to increase the size of the hole by the battery to get your new piping through. It was very easy but the custom pipe work depends on what car the intake was meant for. If you get one for 94-97 accord then I will be able to tell you what you will need to do to get the correct pipe cuts.

[Sabz5150]

Yeah, definitely give that valve cover a paintjob. After that stuff some more into performance and make her fly :)

[Not like a rock]

Sounds like a no hassle CAI setup. What brand is it? I'd like to know the correct pipe cuts.