specs for teg tranny

[Justin86]

I'm trying to find the gear ratios for the 1G teg. I have found two sources and each has given me different specs on the gear ratios. I'm trying to find out which would be the quicker tranny the lude, or the teg, or maybe a combination of both. :confused:
This is what I got for the teg ratios
1st- 3.166
2nd- 1.857
3rd- 1.259
4th- 0.967
5th- 0.794

-or-

1st - 3.250
2nd - 2.052
3rd - 1.416
4th - 1.103
5th - 0.906
Reverse - 3.000
Final Reduction - 4.400

[smufguy]

I think this one is right for the Teg, but im not sure.

1st - 3.250
2nd - 2.052
3rd - 1.416
4th - 1.103
5th - 0.906
Reverse - 3.000
Final Reduction - 4.400

This is the 3g

3.181
1.842
1.250
0.937
0.771
Reverse 3.000
Final 4.066

I would say change all except the 5th and final and reverse and u should be good.

[Justin86]

That was the plan for the gear set up. Now I just need to find one. :) I need to look more on the net to see I can be 100% sure.

[smufguy]

i wish the search was working. Cuase someone like 2 months back, put the vales of it.

Ask one of the moderators or ask viny or some guys like that.

[Justin86]

Well I know that B20ACCROD did it but on his site the ratios he gives don't seem right and on the net I can't find much.

[smufguy]

the gear ratios on my site are directy off the shop manual for the cars sent to the US. some places the ratios seemed to have changed for the 3rd gen. I dont know why or how, but seemed like its what it is. You can check The shop manual spec section for it.

I told yasu that his ratios are a lil off. BUt his B20A tranny seems to have the same ratio as the A20 tranny ratios for some weird ratios. I thought it would be a lil higher.

[Justin86]

thanks :wave: