CRX front lip on our front bumper

[Oz87Si]

Before someone cracks its and says "Do a search!", dont...because the search is not working for me at the moment unfortunately. I want to give my car a little lower look on the front bar before I get some 17's and a lowering job next year.

Does it seriously just bolt on and look nice without any dimensions mods?

[shepherd79]

it won't bolt up. the crx is narrow. you will have to make it wider.
look for 90-92 integra body kits.
they fit with very minumal modification.

[Vinny]

Yes the crx was more narrow then the accord. but the CRX lip can be done but you will need 2 of the front pieces to make it work along with the 2 side pieces. You have to lined them up, basically cut them in the middle of the bumper, then mold them together

[Dennis]

what modification is required for the 90-92 teg kits?

[shane_lxi]

you should just have to cut two small sections for the lights to function properly, and cut off the area in the middle, where the hood connects to the bumper (very small lege thing).
Then you have to find a wrecked teg, and take the mounting hardware. You will then have to do some drilling and cutting on the mounting hardware, it is supposed to bhe fairly easy. But I have never done it myself.