PDA

View Full Version : JESUS!! another code, 14



Morbid Intentionz
12-24-2003, 06:04 PM
Where can i find the IAC valve and what is it most of the time that goes out, the sensor? NEED HELP please!!

TWOLOUDNPROUD
12-24-2003, 07:58 PM
http://images.cardomain.com/member_images/11/web/359000-359999/359877_61_full.jpg There you go :bandit:

Morbid Intentionz
12-25-2003, 05:21 PM
thanks for that now my next question, do i need to replace the whole thing or what? And how much you guys think it will cost?

TWOLOUDNPROUD
12-25-2003, 07:40 PM
I have no idea what the cost is for it .Your best bet is to get a used one.

1988starter
12-25-2003, 07:49 PM
I have an extra I can let go for 40 or you can go to majestic honda it is the cheapest place to get a new one I was told by pepboys and autozone that no one makes them aftermarket

Vinny
12-25-2003, 09:26 PM
There like 130 bucks from Majestic, but they are ALOT more aftermarket, like double. If you don't have the shop manual download it. Theres a check using a meter for the IAC, its really easy to check. If it checks bad definitely get one from salvage its one of those easy to get parts, 2 bolts 2 rubber lines

Morbid Intentionz
12-26-2003, 06:43 AM
So its the whole housing type thing, not just a sensor huh?

TWOLOUDNPROUD
12-26-2003, 08:06 AM
I have one you can have it good let me know where to send it

Morbid Intentionz
12-26-2003, 02:43 PM
Replaced and still gettin code 14? What do i need to have to check the sensor so i can rule that out, then how would i rule out the connection to see if its somewhere in the cirkuit?

Morbid Intentionz
12-26-2003, 02:51 PM
Or could it be the idle control solenoid valve or something else leadin the ecu to believe its somethin else?

Morbid Intentionz
12-26-2003, 04:59 PM
How would i go about checkin the cirkuit, gotta work monday so i gotta get this fixed.

1988starter
12-26-2003, 06:15 PM
I was getting the same code it turned out to be low fuel pressure I reset my ecu and then it gave me an o2 sensor code. and the code stayed untill I got a new regulator.

Morbid Intentionz
12-26-2003, 06:30 PM
So since im still gettin this code, it could be the regulator and /or fuel filter? HOw much do them run? Ruff estimate

1988starter
01-16-2004, 07:58 PM
Ok here is the thing abut code 14 it is a fickle mistress I have gotten it many times before when it was not the problem. Once when my fuel pump was going to die. Once when my regulator went bad and one final time when my map sensor was unpluged. So take it off clean it well with throttle body cleaner. RESET the ECU then put it back on see if you get a code BTW I have one that is in working order 30 shipped.

jigga89SEi
02-17-2004, 11:20 AM
quoted from me

Fixed...Now new Sputter
I changed my t-stat...and cleaned and adjusted the fast idle control valve.... Now my ecu is throwin' a 14, and it's sputtering during acceleration..... I've searched and done a little bit of reading.... And I know 14 is the IAC valve... So is it possible I just messed somethin up when I was working on it... Or do I need to replace the valve.... Please help.... To make the situation worse... My girlfriend fly's in from arizona today.... I'm supposed to pick her up at the airport at 4:30... The airport is 3hrs away.... I didn't get to see her valentines day.... And to make it even worse today is here birthday... I really need to get this fixed.... Please help...
Jade
AKA
Jigabu

quoted from me

i checked the plug to the IAC....And reset the ECU....Its still sputtering in first...But it don't do it all the time.... Please help.... I've got to get to the airport....

Any advice??

Morbid Intentionz
02-18-2004, 10:49 AM
Well i didnt have the 267 for brand new one so for now what i did to solve the problem temporarily, i adjusted the air/fuel screw on the intake mani

shepherd79
02-18-2004, 02:24 PM
what you adjusted was not a mixture screw. you adjusted the idle screw.
the mixture screw is inside the black box.

1988starter
02-18-2004, 05:56 PM
Well i didnt have the 267 for brand new one so for now what i did to solve the problem temporarily, i adjusted the air/fuel screw on the intake mani

you can get a new one from majestic honda for less than 150 shipped

Morbid Intentionz
02-18-2004, 07:15 PM
what you adjusted was not a mixture screw. you adjusted the idle screw.
the mixture screw is inside the black box.
ok ok , thats what i ment , but what imma do is try to clean it with throttle cleaner and if that dont work, 1988starter do you still have that one for 30 shipped?

1988starter
02-18-2004, 07:54 PM
ok ok , thats what i ment , but what imma do is try to clean it with throttle cleaner and if that dont work, 1988starter do you still have that one for 30 shipped?


Yes I do I accept paypal and MO but pefer paypal

Volitech
02-19-2004, 01:39 PM
Hey 1988starter if morbid doesn't buy that let me know I'll take it!

1988starter
02-19-2004, 02:38 PM
I send a PM to morbid if he does not want it it is yours BTW the resistance is 10.9 ohms specs for a good one are 8-15