PDA

View Full Version : adj. cam gear pic



guaynabo89
07-01-2002, 11:03 AM
I've been waiting a month and a half for this to get made. It's good quality and the guy even put degree marks on it for me.

guaynabo89
07-01-2002, 11:05 AM
Here's one from the back.

87accord
07-01-2002, 12:12 PM
nice:pimp:

ACCORD EX
07-01-2002, 12:30 PM
looks sporty ! ;)


MIKE

OldSchoolSwap
07-01-2002, 08:11 PM
Sweet!

A20A1
07-01-2002, 10:10 PM
And who made them?

MoonScryer
07-02-2002, 07:00 AM
Yeah, who...

guaynabo89
07-02-2002, 08:06 AM
This man I know made it for me. I sketched it with some measurements. A month and a half later I had it. He also made pulleys, fuel rail and a couple of misc things for me.

He works out of his home. He has a nice machine shop in there. He specializes in aluminum.

Paul Aerodeck86
07-02-2002, 09:50 AM
How much it is cost? And can he make it for us?

guaynabo89
07-03-2002, 04:47 AM
Originally posted by Paul Aerodeck86
How much it is cost? And can he make it for us?

He made it for me for $160. I'm pretty sure he'll make more if I bring him some. He already made mine so he would have something to go on.

If people are interested I could have him make more. I found out one thing. It wieighs the same as the stock gear. I was hoping it would be alot lighter but, most of the weight is on the gear part of it.

He couldn't make the gear part of it in aluminum because he doesn't have the right size bit. (or whatever he called it) It was very expensive for that pice like $350 or something and I wasn't going to pay $500 dollars for a cam gear.

carotman
07-04-2002, 06:15 PM
Justin was asking people to buy his camgears for 150.... but no one was interested....

88LXiHB
07-04-2002, 06:54 PM
Is he still going through with them, I thought he gave up...?

MoonScryer
07-05-2002, 04:50 AM
*waves hand in interest to Justin*

88turboaccord
07-05-2002, 10:07 AM
The guy that is doing them is freakn' slow.. He has 14 blanks already made and 5 that are almost completely made. He still needs to put the groove into them for the cam, and he needs to put the degree marks on them and that is it----so far they have been sitting for about a month. He is a busy man, and my job is just a little 5 cent job compaired to everything else he does. All I can do is just keep showing up and asking why they are not done..

hondaman87
07-05-2002, 12:35 PM
if any one is interested in selling them put me down for one plz