PDA

View Full Version : washer fluid



88vert
01-10-2004, 10:58 AM
I know this sounds stupid but where is the washer fluid tank located :help:

Mike's89AccordLX
01-10-2004, 11:02 AM
Drivers side front corner next to the headlight. Should have a blue lid.

88vert
01-10-2004, 11:13 AM
Thanks alot Mike

Mike's89AccordLX
01-10-2004, 11:18 AM
Yep, no problem. Let me know if you need help with anything else. Welcome to the board by the way. Where in Iowa do you live b/c I live in Southern MN.

88vert
01-10-2004, 11:23 AM
I live in Clinton Iowa it on the river right down the road from Dubuque.I have another problem to,my gas mileage sucks I am going to autozone to get a fuel filter PCV vavle and a can of seafoam for the intake.I am getting 250 miles per tank on the highway.I already changed plugs and wires.Got any other suggestions Mike?Thanks alot for your time and the warm welcome

88vert
01-10-2004, 11:25 AM
Do you know any Stoltzman's?My girlfriends family is from Mankato.We go up there evry year for family reunion's

Mike's89AccordLX
01-10-2004, 11:35 AM
Replace the cap and rotor for sure. Put the Seafoam in your gas tank. Get a custom intake. The stock one is really restrictive. Or you can just get a new air filter.

88vert
01-10-2004, 01:24 PM
I will keep you updated Mike :cool2: Thanks for your help

k-roy
01-10-2004, 01:26 PM
A quick tip. Get the deicer fluid. It kicks ass. A quick fix for no cap is plastic food wrap and a rubberband.

88vert
01-10-2004, 01:29 PM
I still have not found where the washer fluid is at :beat: I already changed cap and rotor and plugs and wires

k-roy
01-10-2004, 01:39 PM
Ok im bord, here ya go
http://monolith.projectgamma.com/~kroy/3geez/100_3792.JPG
Its in the center behing the popup.
Man my car is dirty in the engine, good thing I have another car to play around with.

88vert
01-10-2004, 01:43 PM
That is not there on my car.

k-roy
01-10-2004, 01:46 PM
That is odd. I have a 87 LX so it might be a little differant than yours. It could be missing alltogether. Anyone else have any ideas?

88vert
01-10-2004, 01:50 PM
My car was in an accident before I bought it so its proball gone

sccrsteve5
01-10-2004, 02:48 PM
are there tubes connected to ur nozzles? if so, disconnect one of them and poor a lil into the tube using a funnel and look to see where the fluid comes out, if there is no fluid, there is a place for it or else its stopped up...hope this helps