Replacing distributor and ign. coil....

[soljaboy2000]

The Chilton says that if I change the distributor then will have set the timing. I just wanted know if it is required? And also this came up on a search for a perfomance ignition coil using my car specs...so that means this will fit?
http://www.partsamerica.com/PartDetails.asp?SourceArea=&SourcePage=SEARCHRESULTS&MfrCode=ACC&MfrPartNumber=140001&CategoryCode=3345

http://www.partsamerica.com/product_images/img/ACC/140001.jpg

[Elijah]

Most are uni.And u dont have to set the timeing.I have msd sci and msd coil and 8.5mm magnecore wires.In all honesty if u have no other mods I would get some first.

[A20A1]

Lol, you found my mega coil. :D

[soljaboy2000]

so that yellow thing will fit my car......the plugs look different though

[A20A1]

The wires will need to be spliced together (black with black and blue with blue).... I have a soldering iron if you want to make a good connection.

Black w/ yellow stripe are Positive
Blue wires are Negative

[1988starter]

I got one of those with a msd 6al magnecore wires and NGK irridium plugs much better than the blaster 2 coil I had before