Where would i get one of these?

[89accordex]

I noticed in some peoples engine pics of there carb cars there air filter is open on the sides and has just the lid on it where do i get a setup like this my car seems like the air flow is a little too restricted.Also is this bad for my engine cause i use my car for work without it i have no job so reliability is a very big concern to me. :help:

[blazin3gen]

what u need is a Air Intake box off an 88-91 civic. check your local junkyards bro

[mykwikcoupe]

I think your talking about the flippedlid. Check the how tos. Its in there

[blazin3gen]

oo so your not talkin about this set up?

http://images.cardomain.com/member_images/8/web/404000-404999/404252_94_full.jpg

[89accordex]

no not that setup i'll find a pic on here and show ya's anyone wanna explain to me how to post a pic?

[blazin3gen]

shure all u need to do is add a URL IN THE MIDDLE

u just have to upload the image somewhere like cardomain


Info for the flipped lid

http://3geez.com/showthread.php?t=15582&highlight=flipped+lid

[89accordex]

Picture the part that your airfilter sits in well cut the sides off and rest the lid on the filter so the carb is coverd then screw the lid on thats what i mean i saw a pic of it and can't find it but thats what i wanna do.

[dXsquared]

where in canada are you? do you have emmisions? wanna buy a weber carb? its got an open filter and will give you a nice boost in HP

Travis

[Ravenix]

i flipped the lid on my carb it looks like there are no sides on it, ill take a pic and post it, all you need is to take off the cover and flip it upside down and screw it back on, leaves a big gap for extra airflow, sonds tight as hell to when you start suckin that extra air in, nice and deep

[89accordex]

I am in NB in canada but i don't want a webber there too hard to adjust and this cold weather probally be hard to get running,also a pick of the flipped lid would be cool to see if thats what i'm talkin about.

[A20A1]

this pic is old... but I know what you mean.

[89accordex]

the pics not workin
will you email it to me?

[A20A1]

I am in NB in canada but i don't want a webber there too hard to adjust and this cold weather probally be hard to get running,also a pick of the flipped lid would be cool to see if thats what i'm talkin about.

Webers are easy to adjust... and you wont have to change any jets if you don't want to.

The DGEV that comes in the kit has it's own choke and you can keep the intakemanifold heater as long as you plug up the coolant port that was under the stock carb.

The only real difference is that you wont have the preheater hose off the heat shield providing warm air to help heat the carb and fuel.

[A20A1]

how can the pic not work?
it's loaded onto 3geez. hmm
let me see if I have it somewhere else.
try refresing the page too.

[89accordex]

yes thats the exact pic.

[copper700]

89accordex where about's do you live in N.B.? I live in Woodstock.....didnt know there was ne one else here from N.B.