another PCV question !!

[skull1441]

what is the easiest way to get to the PCV valve on a carb ??

[shepherd79]

from the top

[A20A1]

remove the air cleaner by unbolting it from the valve cover and remove the air cleaner lid to unbolt it from the carb... then lift the air cleaner out of the way carefully... removing the vacuum lines that are underneath and removing the hoses that are on the drivers side of the air cleaner.

You also should remove the intake pipe from the left side and the electrical connection that goes to the intake temp sensor.

Once the air box is off you should see the upside down "U" shaped hose... remove the clamps and the hose and then carefully remove the PCV valve.

[skull1441]

ok i got it thnx