PDA

View Full Version : Blown transmission



easyryder
02-13-2004, 10:56 PM
K I won't get into how but my 5speed is now a one speed
I have access to a few first gen Tegs and a few 2nd gen ludes as well as a few accords. So what I'm asking is what do y'all think I should go with ?

jigga89SEi
02-14-2004, 01:07 AM
Teg.......

easyryder
02-14-2004, 06:30 PM
So will the 1st gen teg trans bolt right up?

nswst8
02-14-2004, 07:11 PM
Your going to swap the gears to an Accord housing and then bolt it in. Now the Ludes bolts right up but you have to use a lude clutch and possibly flywheel too.
I believe there is a "HOW TO" on this.
Hope this helps, LOL
Phil :cheers:

easyryder
02-14-2004, 08:58 PM
Thanks alot It does help! It seems to me that the lude trans has a bit of gear ratio advantage....correct me if i'm wrong

easyryder
02-16-2004, 06:19 PM
So I did so searching and If I got this right I CAN bolt up a teg transmission if I use the accord bellhousing Anybody confirm this?
and ps Do the axles slide right in to the teg diff?