89 Accord LX - Brake/Horn Fuse Blowing When Brake Pressed.

[Glowin Smurff]

Title pretty much tells the whole story, just wondering since i know it seems like a common problem for the fuses to blow on the 3g's for brake lights, if there could be something causing it to blow or if i should check the clips and wires more closely?? or does that sound more like a socket problem, my tail-lights are working fine but it's just the brake fuse that keeps blowing, any help would be greatly appreciated and as soon as possible would be great too, since i use it as a daily driver and my drive home from work is at night......

[accordlxi2.0]

either there is a short or your using a weaker amperage rating.

[iamvandemon]

check for shorts at the tail light assembly and around the brake pedel. most likely it is at the tail light. look for corrosion and burn evidence.

van

[Glowin Smurff]

Well, i found out it's not when brake lite is being pressed, it's about 30-60 seconds after i put in a new fuse under hood, it'll blow by itself, so does that mean it's the horn that's causing it to blow??? and if so, how do i go about unhooking the horn or horns?