I Need Help Fast!!!!

[accordlxi2.0]

I REALLY NEED SOMEONE'S HELP RIGHT NOW . . . .
i'm trying to get the alternator in right now i got it in but i can't get it to the bottom mount!!!
It does'nt wanna go in.
can anyone give any suggestion's???????!!!!!

[BootMachine]

The bottom mount meaning the piece that the big pin goes through?

ha ha ha ha ha h aha......If so your in luck cause I had the same problem!

OK..take the pin out and clean it. Sand it and lube it so its like butter going in and out..this will help!

Take the alternator out and shave down the casting where it plugs into the bottom of the mount. Use a dremel if you have it or a file if you dont. It will just take longer. Take a mm off and check, then do it again until the alternator goes in and out like pure butter.

THEN..take that buttered pin and do it up!

[86LXItooFAST4me]

put it in the bottom mount first

[BootMachine]

http://www.slhondaparts.com/images/PCI/13SE00/021/6.jpg

Is pin #12 the piece you are having trouble with?

[BootMachine]

put it in the bottom mount first

Sometimes the bottom mount is so friggn tight you cant!

Mine was like that!

It took me 2 days to get my alternator in until I said fawk it and took the dremel to the alternator casting and shaved it down a little!

[accordlxi2.0]

yep not the pin i haven't even gotten to that part yet.it's the alt, fuck so that mean's i gotta take it out again.!?!! :gun:

[k-roy]

I had to grind about 1/4 of an inch off the bottom of the alternator for it to go in.

[accordlxi2.0]

POS may not work now, i'ma see what i can do. . . . .

[BootMachine]

I bought a BOSCH alternator and for some reason their castings are a little to big.

You gotta take it out and shave it down a little!

I had about 3.5mm too much metal on there!

You can always hammer it in there but good luck trying to get it to line up with the pin properly!

Its less effort to take it out, grab some newspaper and sit down and watch a little TV while you shave away!

[86LXItooFAST4me]

oh yeah, mine did that also, i remember, i just filed the alt on the bottom mount on both sides

[accordlxi2.0]

:tongue: :omg: :chainsaw: i found my dad's dremmal, and it just fell in that wrong hand's
i'll give yall an update.

[k-roy]

:tongue: :omg: :chainsaw: i found my dad's dremmal, and it just fell in that wrong hand's

You sound like me when I was 6. I have had a love affair with it ever since. :cool2:

[accordlxi2.0]

man i used to open and tear everything electronic when i was little, sometime's my brother would take the blame.

UPDATE:::
i did'nt finish it got dark as hell, so i got the alt in but i can't get the bolt in and i don't wanna get it stuck either.
man i fucked up my thumb with the hammer, the valve cover took a gash of my skin, and my face was dirty as hell.

[Blkblurr]

Accordlki2.0 Your making me laugh with your way of telling what happened. Not laughing at the trouble your having just the way you tell it. Good humor, keep it up.
:cheers:

[accordlxi2.0]

well i'm glad but i got back up at 6 in tha morning, had dremel alot moredown,then i had to screw the top bolt on then tha bottom.
started it up it's giving out around 15volt's.
and no0w while i'm talking to y'all im enjoying a nice big mug of beer :cheers: . . . . . . .root beer that is. :beer:
thanx 4 tha help homey's!!!