PDA

View Full Version : Questions



jjlj86
07-09-2002, 09:42 PM
:flash: Is it hard to turn carb. into fuel injection? and where can i get a B20a or a B16 like you all talk about. And which is faster.

YK86
07-09-2002, 09:49 PM
1)Are you mechanically inclined and aren't afriad to be ripping out the dash, taking apart or removing the engine, and running wires and stuff like that? If not, yes, it's very hard.
2)Hard to say which is faster since we don't have any real dyno numbers to work with for the B20 in an North American 3rd gen but on paper, the B20 should win due to the more torque. The B16's are quite abundant (most swap shops should know where to get one) while the B20 must be imported in from Australia, New Zealand, or Japan since no oine knows what the hell they are.

GreenMachine
07-10-2002, 04:50 PM
If you have mechanical expeirence and are not afraid of seeing you car stripped
- front fenders off, dash off, engine out, dropping steering column, dropping the pedals down, and replacing the whole wire harness ( witch is basically every wire from the front seats forward ) with efi harness.

It's not that bad, but it is definetly a bit of work, it gives you a good idea how everything works and where everything is located. sometimes it can definetly be frusterating :banghead: