Keihin jetting

[k-roy]

In my endless search of maxing out the stock carb I have determined the jets to be too small for my current requirements.
I came across this: http://www.keihin-us.com/list.htm

Does anyone have a spare carb laying around or better yet have some stock jets?
I need to check the measurements to see if these or possibly others can be used.
If someone is willing to provide me this info I am willing buy a set and dismantle my carb to try them out.

[A20A1]

Well the jets are casted in except for the idle mixture and two aux. air correction jets... so you can either drill the ones in there to spec or drill out the jet completely and stick the new one in.

Those jets are for a different type of carb.

Did you see what I did already? http://www.3geez.com/showthread.php?t=17102&page=4&pp=20
Basicly all that needs to be changed once the main jets was drilled was the air correction. Used the weber air correction and planned on drilling the mains accordingly.
Though i suggest you keep the powervalve intact unlike how I did mine.