PDA

View Full Version : Engine Pictures



MattsAccord
03-09-2004, 10:33 PM
I have been painting little things in my engine bay and was wondering what everyone else is doing to make it look a little better. If you can please list the type of paint you uses and how you prep it. :cheers:

k-roy
03-10-2004, 12:43 AM
I just picked up a copuple of cans of engine paint and primer.
I purchased Dupli-Color 500 degree engine enamel with ceramic.
I plan on doing the valve cover first. Im gonna soak it in degreaser then wetsand it. After it dries im gonna use 2 layers of primer and maybe 3 layers of paint.
After that there is the Airbox, brackets and a few more small things I plan on doing too.

RobT5580
03-10-2004, 07:05 AM
Here are some new pictures of my Turbo B20A as some may have seen this before. All of the stuff is powder coated and my color scheme will be blue and white and the car will either be painted Si Electron Blue or Championship White.
http://www.imagestation.com/picture/sraid107/pee7fe558f3c6cb157ad449789320923b/f962784a.jpg
http://www.imagestation.com/picture/sraid107/p49e36f709db1276fca85feb1db30ad33/f9627815.jpg
http://www.imagestation.com/picture/sraid104/p24ec6a75a78dac6121b7f988a2d377e9/f9893e60.jpg
http://www.imagestation.com/picture/sraid98/p9dde004ccb40aafcba2e46dd1fc42ada/fa021915.jpg
http://www.imagestation.com/picture/sraid107/pd80fb9024e1c85e678bde501ae6557f3/f962750b.jpg
http://www.imagestation.com/picture/sraid99/p3ffa0badfdfac55c44776fbec439d5ad/f9f47223.jpg
I have Justin's Turbo charge pipes which will also be powder coated white and the other stuff will be blue like the fuel rail and the rest of the vac lines. The blue valve cover is for my other B20A that will be N/A later on in another accord. I know you were probably looking for other engine bay components but the valve cover is always a focal point in the engine bay so you should do yours a nice color that will match the car.

NXRacer
03-10-2004, 08:56 AM
powder coated IM???? http://www.geocities.com/n20_racing/smilies/no.txt

i've got a weekend project that im gonna do this weekend that should turn out pretty good.

lightbulblxi
03-10-2004, 01:39 PM
here is mine, i just used spray paint called engine enamel, and used engine degreaser to clean everything

http://images.cardomain.com/member_images/8/web/488000-488999/488241_19_full.jpg

NXRacer
03-10-2004, 01:47 PM
:rofl: you sprayed stuff while it was still in the car???? :rolleyes:

Mike's89AccordLX
03-10-2004, 01:49 PM
Here's some pics of my engine bay. I have more powdercoated stuff to install though.

http://images.cardomain.com/member_images/10/web/322000-322999/322549_84_full.jpg
http://images.cardomain.com/member_images/10/web/322000-322999/322549_85_full.jpg
http://images.cardomain.com/member_images/10/web/322000-322999/322549_86_full.jpg
http://images.cardomain.com/member_images/10/web/322000-322999/322549_87_full.jpg
http://images.cardomain.com/member_images/10/web/322000-322999/322549_88_full.jpg
http://images.cardomain.com/member_images/10/web/322000-322999/322549_89_full.jpg

86LXItooFAST4me
03-10-2004, 02:16 PM
what exactly is powder coating? what all is involved and how does it work and can it be done at home?

Cyric_accord
03-10-2004, 02:24 PM
http://images.cardomain.com/member_images/3/web/423000-423999/423206_7_full.jpg

That's the most recent one of my... the Valve cover is just a glossy black high-temp engine paint with some regular silver on the writing... but I'm planning on getting them done right and powered coated

BDaccordguy
03-10-2004, 02:38 PM
http://images.cardomain.com/member_images/3/web/363000-363999/363844_9_full.jpg

The valve cover looks to me like it was painted with the same paint as the brakes on my car, which is High Temp brake paint, i hope (was done before the car was mine). The air cleaner cover (a different one from the pic) is painted the same color as the car.

RobT5580
03-10-2004, 04:25 PM
PowderCoating is a special gun that sprays powder that is negatively charged and clings to metal parts. Its not really something most people are set up to do at home because you need a compressor, seperate oven (cant use household oven), sandblaster, and a space to do it in. The guns themself run around $120 but the prep work of the metal is what is the hardest and most time consuming part of it.

86LXItooFAST4me
03-10-2004, 05:39 PM
PowderCoating is a special gun that sprays powder that is negatively charged and clings to metal parts. Its not really something most people are set up to do at home because you need a compressor, seperate oven (cant use household oven), sandblaster, and a space to do it in. The guns themself run around $120 but the prep work of the metal is what is the hardest and most time consuming part of it.

is there a how to? at home i mean in i have a shop and lots of space, just never new how it worked, i thought it was baked, what kinda oven is it?

lightbulblxi
03-10-2004, 06:04 PM
originally posted by NXRacer
you sprayed stuff while it was still in the car????


nah, that wasnt me, i was doin it and my friend goes, u missed a spot, and he sprayed accross the back of that peice, so now i gotta paint it black, cuz it looks ghey, and that was the same friend that cracked all of my needles off in my cluster, hes a smart one, eh?

RobT5580
03-10-2004, 08:44 PM
The process is real simple but you have to start with a piece thats 100% bare metal or it will be flawed and the powder wont stick in any spot thats not bare. Then you spay the powder on Kinda like regular painting but its a mist of powder and its clings to the part (a negatively charged lead is attached to the part). Then once the part is fully covered you bake it and it clears over and is cured. You can use any means of an oven but it needs to bake at around 350d or so i think. I have a medium size lab oven that i use. But you CANT use a oven you cook in because it emits fumes that are not good. So basically most of your work is in prepping the part which most people sand blast them in a cabinet style blaster which can be time consuming unless you have a commercial size compressor that can keep up with the needed pressure. But in the end you have a very durable/nice finish if you do the prep work.

TWOLOUDNPROUD
03-10-2004, 09:39 PM
http://images.cardomain.com/member_images/11/web/359000-359999/359877_14_full.jpg http://images.cardomain.com/member_images/11/web/359000-359999/359877_7_full.jpg

Robs89LXi
03-14-2004, 12:11 PM
How do you guys with the realy clean engine bays keep them that way?

MrBen
03-14-2004, 12:37 PM
We are anal about our cars and wipe them down. All it takes is a trip to the U-Car-Wash place and blasting that engine clean. After that it's just wiping it down regularly.

Robs89LXi
03-14-2004, 12:44 PM
I've thought of that, but was always afraid of tearing something up, or ruining electrical components. Anything special to avoid?

TWOLOUDNPROUD
03-14-2004, 01:02 PM
New pics today 3/14/04 http://images.cardomain.com/member_images/6/web/486000-486999/486873_57_full.jpg http://images.cardomain.com/member_images/6/web/486000-486999/486873_59_full.jpg http://images.cardomain.com/member_images/6/web/486000-486999/486873_58_full.jpg

BDaccordguy
03-14-2004, 01:26 PM
the main thing to do rob is make sure the engine has cooled down and cover up the distributor cap with a plastic bag or something and dont spray it directly.

Robs89LXi
03-14-2004, 01:52 PM
Thanks for the tips. Hey, Mike's89AccordLX, that's a pretty trick looking plexi airbox you have. How are you getting air into it though? Am I seeing it right, and you have a cut-out in your hood for a hood scoop? Still, I can't see how you would direct air into the box? Explain, please?

customandsound
03-18-2004, 07:14 PM
powder coating is easy to do ... the process is like dust going to the tv ... the parts are degreased ,, put in a bead blaster ,, to give the powder a place to get a good grip .. i hot wire is attached and a ground wire is attached... the the podwer coming from the gun has a charge to it like a magnet ,,, the part is cover to about .. then placed in an over at 400 f for 25 minutes to the paint flows and cures .. with steel parts they are simple ... alum. parts need to be heat in the oven at 425 f for out gas.. alum. this will then remove as much gas from the metal as it can after i outgas the part i go right to spraying ... then back to the oven for 25 minutes and let if cool.. there are over 1000 colors and custom colors... from candy to anodized.. chrome to color change ... i polish parts then do them in a candy or anodized and the y are great looking .... powder coating is durable and easy to clean just wipe and go.. withstands heat .. looks better than spray ... the high temp coating's i do are the same as powder coating and some what like jethot ... but on the valve covers you don't get the oil baked on look as much .... any ? email me and i will be able to help you out .....

customandsound
03-18-2004, 07:15 PM
my email address is on my webpage .... just hit the link and it will take you to it

Dragonfly
03-18-2004, 07:21 PM
wach out for the air filters to