PDA

View Full Version : turn signal problem



jaminjames
03-10-2004, 04:51 PM
ok all my lights work but my 2 front bumper turn signals, i replaced the bulbs and even did a power test on the wires to the 2 signals and there is no powere to them. what should i try next??? all fuses are good under the dash,,

Hash_man_Se_i
03-10-2004, 06:31 PM
Could be the actual socket which the bulbs go in to. You can probably pick up new generic ones for about $5 each, or find some at a wrecker.

jaminjames
03-10-2004, 06:39 PM
i have no power to the wires itself,,, and they don't sell the sockets

MrBen
03-10-2004, 06:55 PM
Check the fuses, I mean ALL fuses?

Well when this happened to me both bulbs were burned out. But i heard about a sidemarker control unit that is under the dash behind the radio that goes out and causes things like that to happen. Outside of that I don't know. Sorry.

jaminjames
03-11-2004, 02:13 PM
ok i just got done checking all fuses again ,they are all good,all turn signals work but the 2 in the front bumper, and flashers work to,i have no power going to the turn signal wire at all, i ran a power test,, please help,,,ty