Break line Q

[DanG86LX]

My front-driver-side break line hose burst at the worst place, driving downhill! It was actually fractured at where a metal bracket was crimped to hose..
Went to H-dealer and bought a replacement hose, btw that's quite a piece of hose with 3..4 metal nipples, brackets and connectors. Now i'm trying to disconnect the old one at the hose - pipe connector (not at caliper), obviously it doesn't budge. I'm not even sure which nut should be turned.. Haynes show sort of a pic where u supposed to use two wrenches, one on the end connector of the hose, the other on a nut on hard line. My Q, which one should be turned? I'm afraid of braking the hard line.

Thanks guys.

[BMS]

Start by keeping the hard line still and twisting the hose side. That way you can test it but not worry about breaking the hard line.

edit: post #1,000 :)

2nd edit: the fire alarm is going off and there are cops and fire trucks arriving with blaring sirens as I type.