PDA

View Full Version : Apexi AFC II installed


shepherd79
04-07-2004, 12:05 PM
I finaly got some time yesterday to install the apexi.
So here is the picture of it installed.
oh yeah, yes, i can feel the diff with it.
sorry for the quality of the picture, i need to get better camera.

http://webpages.shepherd.edu/abetke01/apexi.jpg
erics86dx
04-07-2004, 12:07 PM
what does it do?
shepherd79
04-07-2004, 12:11 PM
it modifies the MAP sensor signal so i can add or reduce the volume of the fuel.
in simple words i can make it run rich or lean.
Bloodlust
04-07-2004, 12:14 PM
Hey when u come up to my meet in May you could install one for me :D
86LXItooFAST4me
04-07-2004, 12:27 PM
so then did you keep the 4G map sensor??
erics86dx
04-07-2004, 12:30 PM
thats cool then, more power to you brotha
NXRacer
04-07-2004, 01:39 PM
now all you need is some nawz, crank up the fuel so it runs really rich and you're shooting flames out your tailpipe!! :D j/p

thats sweet. Is it really necessary to have on a N/A car? I thought it was only really needed on a car with forced induction or with a really well built N/A car. . . . . .

and yeah, did you use it with your 4g map sensor???
Busted_Blue
04-07-2004, 02:27 PM
my friend has that exact same one on his 92' DSM GSX. nice to fit in the ashtray. Looks really sweet like it was meant to be there!
shepherd79
04-07-2004, 04:03 PM
i like it a lot. yeah i used it with 4G map sensor. it is wild. i don't have to floor it to spin my tires through first and pat second gear. i don't do it a lot, i like to save some tires.
i wish i got the never one. this one doesn't set diff setting for each RPM range. on this one i just set the level i want and i go. it works for every RPM range.

i was thinking about the NX kit. i just don't know what is the cheapest wet kit i can get with a small bottle. NXracer, could you pm me about that info. thanks.
Justin86
04-07-2004, 09:31 PM
Thats sweet, I could use one since my a/f is all messed up and that would fit nicely where the clock is at. Oh yea and get the juice, it will be a nice addition. The cheapest is $411 with 10lbs bottle. The next best kit is $481 which is what I got and with dual purge.
Cyric_accord
04-07-2004, 10:03 PM
Looking good Shep
adams86lxi
04-07-2004, 10:13 PM
man, thats tight! good work!
A20A1
04-07-2004, 10:18 PM
Hey thats neat, are you going to get another 02 sensor and A/F guage?

I tried splicing into a o2 sensor once trying to keep it hooked up to the car but the signal isn't as strong so I connected the guage directly to the sensor.
shepherd79
04-08-2004, 03:49 AM
Thats sweet, I could use one since my a/f is all messed up and that would fit nicely where the clock is at. Oh yea and get the juice, it will be a nice addition. The cheapest is $411 with 10lbs bottle. The next best kit is $481 which is what I got and with dual purge.

well, i thought about mounting where the stock clock is, but there are no room. you will have to remove the dash to mount it.


Hey thats neat, are you going to get another 02 sensor and A/F guage?

I tried splicing into a o2 sensor once trying to keep it hooked up to the car but the signal isn't as strong so I connected the guage directly to the sensor.

i have two sensors now since i have pacessetter headers. they are connceted together, otherwise the car won't run right.
anyway, the O2 gauge is in plans and it will be digital since the signal is only 1V max, it is easy to figure out with digital read out. i was gonna go with something like this http://www.duostyling.com/frames.html click on products
or this http://www.gadgetseller.com/gauges/digitalproducts.htm
the worst case i will get this http://www.gadgetseller.com/gauges/modifiedproducts.htm