Mesh Grille

[howndamane]

ive been working on how to work in some aluminum mesh on the front of my 89 LX-i, just wondering if anyone had done this how i should go about it. i wanna work some fog lights into it too.

[DanLXI88]

http://3geez.com/showthread.php?t=6541&highlight=Mesh+Grill

You can also use search for Mesh Grill and find alot of infomation.
:welcome:

[DeathRat]

I fiberglassed my Mesh Grill into my Ground FX & fiberglassed on a smaller piece behind the stock grill that sits just above the bumper too.

[HondaBoy]

heres my mesh grille. it was originally left bare. it was galvanized steel, so the color was like aluminium. then i finally painted a while back. havent made anything for the bottom grille. i found it easy to cut with tin snips. the stuff i used was from Home Depot, cost about $3 i think for a sheet about 7x4 feet.
http://images.cardomain.com/member_images/11/web/347000-347999/347392_145.jpg
http://images.cardomain.com/member_images/11/web/347000-347999/347392_146.jpg

[89cordlx]

the one that Hondaboy did, I think I did the same thing. That bit comes apart and you just sandwich the mesh in there (thats what I did anyways) and for the bottom part I just zip tied some of that gutter topper mesh stuff in there, worked out nicely.

[DeathRat]

On mine I fiberglassed it behind the upper grill instead like this:
http://images.cardomain.com/member_images/11/web/491000-491999/491601_32_full.jpg

Then on the lower portion of my Erebuni Ground FX, I cut away the center portion & fiberglassed another piece of Mesh instead like this:
http://images.cardomain.com/member_images/11/web/491000-491999/491601_42_full.jpg