View Full Version : whats the best bolt loosener?
johnwc723
05-02-2004, 06:51 PM
well im in need of some good stuff as i cant even tell that a bolt was there on my suspension that im workin on here
in you guys opinion whast the best bolt loosener/penetrant
right now i got PB Blaster and its not workin
87accordlxi
05-02-2004, 06:54 PM
PB Blaster has always worked for me. Just spray it on and try loosening it in 5-10 minutes.
AccordEpicenter
05-02-2004, 07:03 PM
yeha thats the best stuff ive tried by far also. Its usually best to leave it overnight
Neuspeed87lx
05-02-2004, 07:19 PM
there is some stuff called liquid wrench that works well .... but suspension bolts are always fun ... best bet, get a torch and heat it up then loosin it
There was a product posted here a while ago that is suppose to be real good. It is Aer Kroil.
http://www.kanolabs.com/
k-roy
05-02-2004, 07:34 PM
PB Blaster or a torch if its safe.
AZmike
05-02-2004, 08:11 PM
PB Blaster works for me
AccordEpicenter
05-02-2004, 08:22 PM
wait what bolt do you need to get off???? some of them its better to just cut off
88accordhb
05-02-2004, 08:58 PM
lots of time and love. haha i tried wd40 and it was ok. needs lots of it
adams86lxi
05-02-2004, 09:07 PM
i usually use a breaker bar and some pb blaster and dont useually have any probs. try wd-40 too
ag bullet
05-03-2004, 03:08 AM
i usually use a breaker bar and some pb blaster and dont useually have any probs. try wd-40 too
I usually soak things overnight with Liquid Wrench. If that fails, I break out the torch and breaker bar.
fuzzy audio
05-03-2004, 06:12 AM
A guy I knew back in the day used Zep-45. That stuff was the SH!T but I can't find it. So PB or WD is what I use.
Dibbs
05-03-2004, 06:18 AM
PB Blaster if you can't soak the part in question. If you can soak it, use Kroil.
StillAHondaFreak
05-07-2004, 10:26 PM
87accordlxi is right, i like PB Blaster also, spray the shiot out of it then go to bed, try to break it loose in the morning, good luck!!!
87AccordsterLx
05-09-2004, 09:49 AM
Can you take an impact gun to it? If it's really tough you might need to take it to a local shop and ask them if they could take a high pressure gun to it... I had to do that for a bolt on my suspension. They just spun the sucker off and I was on my way...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.