Will ITR seats fit?

[Hash_man_Se_i]

I am just wondering if I would be able to put some of those Integra TypeR seats in my car? you know, the black ones with the red stitching?

I am assuming that I would have to modify something, but how hard is it?

[SteveDX89]

Seat rails will have to be custom made.

[shepherd79]

i think sparco makes rails for our cars, but i can't be sure. i know some company is making rails that will hold aftermarket seats.

edit: Ok i found who makes them. it wasn't sparco.
here are the links http://www.overboost.com/obs/product.asp?pid=20491
and http://www.overboost.com/obs/product.asp?pid=20492
i am not sure if any other than Corbeau seats will bolt to them.

[Hash_man_Se_i]

Thanks for the links... but I remember when I used to work at a parts store, I found some sparco sliders for our cars... But these seats are pretty much like normal integra seats, just different fabric i believe, so I don't know if aftermarket sliders would work.

[thegreatdane]

I saw a 3rd gen Accord with ITR seats a couple of weeks ago so i guess its possible to adapt them. I didnt like the way the black seats looked among the rest of the grey interior though.

[Hash_man_Se_i]

I saw a 3rd gen Accord with ITR seats a couple of weeks ago so i guess its possible to adapt them. I didnt like the way the black seats looked among the rest of the grey interior though.


Ya, but if I did that, I would also recover my backseat and door panels in the same fabric and red stitching.

Did you talk to the guy with those seats? because my seats don't give me enough support, and I have a fucked up back, so something with more lumbar, and better side bolsters would be nice, and those seats look ill! lol

[NXRacer]

get yourself some 88-89 LXi seats. they have lumbar support.

[Busted_Blue]

get yourself some 88-89 LXi seats. they have lumbar support.


doesn't SEi have it too?

[SteveDX89]

The lumbar adjustment on the 88-89 LX-i seat I have is jacked up. It springs back to unsupported position by itself.

[Mike's89AccordLX]

Or you can get 3rd gen prelude seats that have the lumbar support.

To your question: Anything is possible, it all depends on what you know and what you can do. Or how much money you have for someone else to do it for you.

-Mike

[thegreatdane]

I didnt talk to the guy, sorry.

[Hash_man_Se_i]

get yourself some 88-89 LXi seats. they have lumbar support.


My se-i seats have lumbar support, but its nothing special, and those integra seats are so damn comfortable.

[Cheeseburger]

bump!

well im going to look at some ITR's tomorrow. im going to see how different they are from the 3rd gen and see how much is needed to make them fit

[MessyHonda]

ITR seats cost alot i just saw a pair on craigslist for 1100 bucks...and they were a bit warn

[Cheeseburger]

ive seen them go for 1100-1400

[MessyHonda]

yeah...that is crazy....worth more than our cars...lol just like my friend he has like 800 buck seats....bride...they are like 6 pounds.

[Cheeseburger]

ya i know more then our cars! but like hash said comfy!

[MessyHonda]

he is making it a drifter....lol he has turbo and runs 5 pounds on a stock engine...he said he keeped up with a k20

[Cheeseburger]

nice!

[MessyHonda]

yeah...his rims have a 4 inch lip...its crazy

[Cheeseburger]

huge!

[MessyHonda]

mad JDM YO

[Cheeseburger]

im hoping these dont take to much to fit. im going to take off the passenger side seat and take it like that when i go see the seats

[reanimator420]

post pics cheese

[MessyHonda]

yeah they might work....look at geddy he has like 3rd gen teg seats.

[b20a86lude]

do it and use the 3ge seats trust me it wil work been there done that

[Cheeseburger]

i forgot the camera! doh! lol.... but the place where i went had 4 sets of ITR recaros. 2 red and 2 black. the red ones were mint but the black ones had a few cigarette burns and one of the black set was a bit faded. im still looking for a really mint black pair

[87lxiaccord]

i tried to put 4g prelude seats in my car today it didn't work out well so i will be selling them an pick up some 3g prelude ones. Just to make sure, the 86-87 and 88-89 bolt holes and rails are the same right? because i haven't seen any 86-87's with 3g prelude seats in them...

[MessyHonda]

i tried to put 4g prelude seats in my car today it didn't work out well so i will be selling them an pick up some 3g prelude ones. Just to make sure, the 86-87 and 88-89 bolt holes and rails are the same right? because i haven't seen any 86-87's with 3g prelude seats in them...


i think they are a lil different...the 86-87 have the buckel screwed down to the body of the car... on the 88-89 its on the seat that is connected to the rails..


here my carhttp://img.photobucket.com/albums/v650/Messybone/car/DSCF2217Small.jpg

[reanimator420]

do the buckles still work beetween the years?