PDA

View Full Version : b20 question



nismoracer99
05-20-2004, 04:08 PM
:help:
whats the difference between a B20A1 and a B20A5??

can i use a B20A5 in my accord?

shepherd79
05-20-2004, 04:39 PM
no you can't.
both engines came from 3rd gen. prelude. to mounts were diff. from 3G accord.
the only engine that will drop in without any modifications is JDM B20A from 3G accord or 2G lude. Every other engine will need to be adapted.

nismoracer99
05-20-2004, 04:52 PM
is there a real good place to get the b20a besides ebay??

shepherd79
05-20-2004, 05:12 PM
talk to "B20aturbo" guy on this board, he can get JDM B20A engines, the problem he can only get auto tranny. manual trannies are very hard to find.

nismoracer99
05-20-2004, 05:46 PM
cool, that helps me a lot :)

what kind of b18 do i need if i do that swap??

thanks a lot btw!

edit: disregard that question, i decided to look around, and looked at the first sticky.

nismoracer99
05-20-2004, 05:58 PM
another question

does the 1988-91 lude come with b20 or have a 5-speed tranny that can fit onto a b20??

thegreatdane
05-21-2004, 02:29 AM
In Europe the B20A1 is the 2nd gen prelude engine.

nismoracer99
05-21-2004, 01:30 PM
i have a second generation prelude in my backyard with a manual transmission, and a dual carb 2.0 litre. the engine is fried though for the most part.

could i use that tranny on a b20?

oh btw, its an '85 Si

Gregg86DX
05-21-2004, 02:20 PM
i have a second generation prelude in my backyard with a manual transmission, and a dual carb 2.0 litre. the engine is fried though for the most part.

could i use that tranny on a b20?

oh btw, its an '85 Si

No.

Everything you need to know about B20A's has been thoroughly discussed in this forum. Please spend a few minutes and browse the threads.

Gregg

shepherd79
05-21-2004, 03:54 PM
you can't swap any 5 speed from lude or anyother car. JDM B20A had its own 5 speed design. no tranny from other engines will bolt up to that motor.
you have to find JDM 3G B20A tranny if you want 5 speed.

nismoracer99
05-21-2004, 08:43 PM
now i see why its hard to find 5-speeds for this engine :sad2: !

after looking at the website for modding the A20's, i might go do that.

if i buy a Built 400hp 8000rpm Capable Shortblock, does it come with heads, head gasket, valves, intake manifold, Block, all that kinda stuff?? my motor has 160,000 miles on it, if i turbo that, it would blow apart :rolleyes: .

i love Accord Central, im not doing an engine swap for a b20 or b18 :thumbup: .


all info on accord central would be greatful :D

edit: i was just thinkin', i need a stronger clutch when im done tuning this car. also do i need to get a new tranny to handle so much power? i plan on gradually getting everything at the website!!

wesku
05-22-2004, 02:14 PM
In Europe the B20A1 is the 2nd gen prelude engine.
And 3G Accords also...