Anyone shaved eyebrows?

[Andrew]

Has anybody shaved the eyebrows off the flip up light or done any other custom bodywork to the front of the car? I'm thinking of doing a little custom work to the front end but I'm not sure what it would look like.

[oneslammedlxi]

damn, you stole my idea.....it would give you a preludish look that i personally like, i say go for it, it would look great!

[pimp86LX]

I shaved off my friends eyebrows once when he passed out. It was funny as hell.

[ChaseR]

I shaved off my friends eyebrows once when he passed out. It was funny as hell.
someone shaved off one of mine when I was passed out :sad2:

[sporkHSP]

the moral here is... DON"T PASS OUT, altho i might not have burned off my pubic hair if i had...

[oneslammedlxi]

Anyone shaved eyebrows?

marilyn manson does



:kekeke: :ugh: :omg: :eek:


lol..

[pimp86LX]

the moral here is... DON"T PASS OUT, altho i might not have burned off my pubic hair if i had...


heheh if you pass out, your fair game. I passed out in a lawn chair around a campfire and woke up completely TP'd and wearing make up. it was hilarious.

the moral of this story....dont spend all day boating in the sun and then drink and sit in front of a heat source.

[HostileJava]

I was thinking about just painting them, although I guess it wouldn't be that much more trouble to fill in the gab that is between the trim and the cover, the tough part comes when you need to change the bulb, you should be ok if you have the H4 conversion cause you just need to pull the bulb out of the back, but if you ever need to change the housing remember that the trim comes off with the black cover around the light.

[88LXi68]

Why not just convert to 3g prelude fenders, headlights, and bumper?

[HostileJava]

Why not just convert to 3g prelude fenders, headlights, and bumper?


Have you researched that steve? Do you know if they just swap over or is there lots of custom work envovled?

[88LXi68]

Have you researched that steve? Do you know if they just swap over or is there lots of custom work envovled?

I havent researched it, but if people have put the 3g lude bumpers on our car, what is stopping using the fenders and buckets? Its worth a shot in my opinion because if you remove the plasitic on our accord buckets we still have those side markers so it really doesnt flow in my opinion.

[Andrew]

I was thinking about just painting them, although I guess it wouldn't be that much more trouble to fill in the gab that is between the trim and the cover, the tough part comes when you need to change the bulb, you should be ok if you have the H4 conversion cause you just need to pull the bulb out of the back, but if you ever need to change the housing remember that the trim comes off with the black cover around the light.

I would just trim the plastic piece, I think it would work, I'll take a closer look before I do anything permanent.

[HondaBoy]

the idea of the prelude front end conversion would be cool. i'd like to do that, use the 3rd gen prelude front end and rear end. that would require more work than just bolting it on for sure. although, if you have the money it wouldnt be much problem. lol.

[pimp86LX]

the idea of the prelude front end conversion would be cool. i'd like to do that, use the 3rd gen prelude front end and rear end. that would require more work than just bolting it on for sure. although, if you have the money it wouldnt be much problem. lol.

i would just get the lude. a tad more power and it handles way better. (stock for stock that is)

[89dxowner]

I think it would look dumb but thats just my opinion.

[Vanilla Sky]

this is what it looks like on paul's car...

http://img77.photobucket.com/albums/v234/wannabe_otaku/paulies_car_eyebrows_shaved.jpg

[pimp86LX]

this is what it looks like on paul's car...

http://img77.photobucket.com/albums/v234/wannabe_otaku/paulies_car_eyebrows_shaved.jpg


wOOt. yup that was my baby. my wicked fast $100 3g :D

[Vanilla Sky]

can't fuckin complain for $100 CAD

[Project-LXi]

There is a sick 3rd gen show car that is by my buddy's ex-wife's place. It has shaved everything, door handles, trim, emblems, molding, trunk, etc.... Its been on the board before, if anyone remembers it was for sale for 7k$ on ebay, from Santa Clara, CA, it had a custom ram air hood scoop and was redish orange in color.

Since it was bought by someone, even more custom work has gone into it; the bodywork, new wheels, and changes to the taillights. If there is any way for him to post some pics here on the site I'll try to get him to.

[HostileJava]

I don't like the way they look, doesn't flow with the trim.

[88LXi68]

I don't like the way they look, doesn't flow with the trim.


thats why i said convert to the prelude front

[HostileJava]

thats why i said convert to the prelude front

Lots more work for what I think wouldn't look that much different.

[ChaseR]

I think it looks better to just paint or tint out the trim...

[Andrew]

I don't like the way they look, doesn't flow with the trim.

I agree, but I was thinking something more like this...


http://www.3geez.com/attachment.php?attachmentid=3177&stc=1

[HostileJava]

I agree, but I was thinking something more like this...


http://www.3geez.com/attachment.php?attachmentid=3177&stc=1

No Post specified. If you followed a valid link, please notify the webmaster

[lightbulblxi]

yea, the shaved eyebrows look very out of place cuz of the egrille and corners.

[Andrew]

No Post specified. If you followed a valid link, please notify the webmaster

I tried to post a pic following the directions for Foundation Members but they are obviously incorrect, when I clicked on the browse button all it did is upload it to my Vb Garage, it did not add it to my post. I think that maybe I am of sub-standard intelligence.

Click on my CarDomaine link below to look at the PIC

[HostileJava]

Hmmmmmmmmmm, still not sure I like that, plus you blanked out the grill?

[pimp86LX]

ya bastard! stole my pic......hehehe he probably did that because i had some flat black on that spot to hide the rust that formed from the missing H on the front. It looks fugly. I flat blacked a lot on that old 3g. at one point it didnt' look 1/2 bad for a $100CAD car

http://images.cardomain.com/member_images/10/web/406000-406999/406314_6_full.jpg

more pics at

http://www.cardomain.com/id/pimp86lx

check out the center console, that was also flat black'd and it turned out nice.

[PortugalFocus]

I think it'd look pretty cool. A 4dr 3G with a lude front end and a lude rear.

[Andrew]

Hmmmmmmmmmm, still not sure I like that, plus you blanked out the grill?

I'm still not sure whether or not I like it either, it's just an idea I was toying with, the grill is supposed to be mesh. I would probably put some kind of trim around it, check the PIC out again. Just make sure you take into account that my photochopping skills aren't the greatest. I would also probably leave the 'H' on the car.


ya bastard! stole my pic......hehehe he probably did that because i had some flat black on that spot to hide the rust that formed from the missing H on the front. It looks fugly. I flat blacked a lot on that old 3g. at one point it didnt' look 1/2 bad for a $100CAD car

Heeeeeeey! My parents were forced to get married BEFORE I was born! I'm legit! LOL

[momo8517]

http://images.cardomain.com/member_images/7/web/595000-595999/595298_10_full.jpg

Was this kind of the effect? I photoshopped this up quick and I think it looks pretty clean. one would be troubled by two things: no grille and no corner blinkers. Both, I'm sure, are easily solved with a little creativity, and can and would be unique, at the very least.

BTW: if I used your car for my little project here, and you don't like that so well, just pm me or e-mail me and I'll be more than happy to take it down.

[speedpenguin]

it makes the car look older, i don't like it.
those stripes make the car look mean, tint them or paint them, but don't get rid of them.
if you do i will spank you for being a silly, silly boy

[HondaBoy]

hold your horses speedpenguin, i'd rethink that. i have some free time, i may draw up some redesigned 3gees. i gotta do it because i wanted to a long time ago. i'll probley get to that. i'll post those up when i'm done.

[Andrew]

Hey Momo

That looks pretty frickin good.

[momo8517]

Thanks man, I thought the idea sounded pretty clean, so I figured i'd spend some time chopping.

[speedpenguin]

i still say it looks like the 1st gen RX-7, but not in a good way.

[Andrew]

I was looking at the photochop I did and it reminded me of something...I couldn't figure out what it was until I walked by my neighbor's 4G

[nismoracer99]

well, im making a 3d model on the computer of a 2 door DX coupe (not hatchback). but its being done in a free modeler program.
pics anyone?

http://www.mm2x.com/upload/files/myaccord5.PNG
http://www.mm2x.com/upload/files/myaccord9.PNG

edit: i forgot to mention, the model pictures are in flat shading, so it look funny.

[sporkHSP]

If you use the prelude bumper then you can get all of your signals taken care of... or with a nice kit on it, that would look super clean, kinda reminds me of older RX7s... but thats the random image that popped in my head...

[ChaseR]

I know its an olde, thread... Does anyone have a car like this now? with the Shaven eyebrows... Im thinking about having this done on mine...

[ChaseR]

http://images.cardomain.com/member_images/7/web/595000-595999/595298_10_full.jpg

Like this, That shit looks sick!

[MessyHonda]

Like this, That shit looks sick!

we would have to shave everthing...even the grill and then how are you going to open the damn hood....lol

[Civic Accord Honda]

http://images.cardomain.com/member_images/7/web/595000-595999/595298_10_full.jpg
it looks like a lude

[labeledsk8r]

that does look good as hell, must take alot of work to do though


we would have to shave everthing...even the grill and then how are you going to open the damn hood....lol
you open it the same way you open shaved doors, electric popers :bandance:

[ChaseR]

Or just like you do now, When you pull the release it will pop up enough to reach under there and open the latch.. DUH.. LOL


Actually it doesnt look like It would be that hard, maybe Extend the hood similar to the way "thegreatdane" did to give his fixed lights that eyelid look and fill in the headlights and paint! It should be pretty straitforward.

[BITESIZE]

It wouldn't matter if you shaved the grill, the hood would still pop up and you could reach your hand in there you goof ass!

[MessyHonda]

It wouldn't matter if you shaved the grill, the hood would still pop up and you could reach your hand in there you goof ass!

damn you guys......i hate you alll...LOL i guess i got :Owned: ...anyways it does look like a 3rd gen lude....

[gp02a0083]

probally illigal anyways w/o the side marker

[frantik]

lol when i saw this thread title i didn't realize which eyebrows

http://www.hoosierdaddy.com/images/Dsc02377.jpg


probally illigal anyways w/o the side marker
in the US you must have a yellow reflector on the side near the front so yeah illegal here

if you're gonna shave the grille and the eyelids you might as well go for the full lude or teg front end conversion imo.. it looks too plain with the flat front plus would it allow enough air flow?

[A20A1]

it looks like a lude

looks like a teg to me... just cut the hood grill area to match the teg hood.

[jschatte]

probally illigal anyways w/o the side marker
well it does have those signal lights like the cars in europe, so it looks legal

[stat1K]

that pic looks just like a lude but it looks like they put an integra hood and headlight buckets on the accord which is an interesting thought i wonder if it would work out? i guess one can only try to know for sure.

[DBMaster]

Actually, the white Photoshopped car looks a little like an old Avanti!