PDA

View Full Version : Newer Engine Bay Pics with Crane Wires


SharkyX
06-14-2004, 04:58 PM
here ya goes

http://images.cardomain.com/member_images/4/web/568000-568999/568362_45_full.jpg
shepherd79
06-14-2004, 05:07 PM
i hope you applied some spark plug grease on the spark plugs.
those wires are a bitch to remove if you don't have the grease.
when i had my first set, i didn't put grease and i riped the wire off.
SharkyX
06-14-2004, 05:17 PM
of coz i did lol
BlueBead
06-14-2004, 05:23 PM
nice!
what kind of paint did you use on your valve cover?
In any case I like your setup!
88accordhb
06-14-2004, 05:43 PM
clean!
Busted_Blue
06-14-2004, 05:48 PM
the wires look like they are a tad short is that normal?

Looks good. Keep going transformer!
ivanfbi
06-14-2004, 09:17 PM
WHERE DO YOU TAKE the WIRES?
shepherd79
06-15-2004, 03:04 AM
WHERE DO YOU TAKE the WIRES?
do you mean Where do we buy the wires?
well there is this place called Option auto salon. they have them on sale
http://www.optauto.com/webstore/product_list.asp?dept=1656&pagenumber=3&last= the last two on the bottom.
they are for prelude, but since lude had the same engine, they will fit.
HostileJava
06-15-2004, 05:54 AM
the wires look like they are a tad short is that normal?

Looks good. Keep going transformer!

That's Normal:

http://hostilejava.com/temp/nx/DSC00538.JPG
adams86lxi
06-15-2004, 09:56 AM
i hated that they were so short, i had to get my to stretch out just to fit. Those wires were crap in my opinion at least in quality mine just started to fall apart in the first week!
lanman024
06-15-2004, 10:42 AM
1988 ACCORD LXI 5SP COUPE FOR SALE 1000$ OBO Must Sell

Okay I would start a post but for some reason when I got logged onto the new 3geez forum i am unable to post a new thread maYbe someone can help me out.

Up for Sale is My 1988 Honda accord 5sp lxi coupe with 150000 miles, Iam the 3rd owner and the Car is in good condition with a CAI intake and Catback exhaust with no cat the car was just painted black less than a 8 months ago and I have also put a wing on the back similar to the 90-93 accord wing. the car is excellent running condition with the oilchanged every 2500 miles it has ngk plugs with bosch platinum plus 4 plugs.I must sell asap Due to me getting a new car, Optional with this Car is My sound System Which i paid 800$ for I am Willing to Sell it for 300$ obo

Pioneer deh-p6400 299$
Boss 1000watt amp 199$
jl audio 2 10" subs in custom jlaudio bandpass box 300$
all for 300$ obo
email me at [email protected]
HondaBoy
06-15-2004, 12:46 PM
lanman024 your a thread whore! lol. anyway, i'd like to get some fat wires like them cranes there. i'll check the link alex posted. i'm wanting to paint my aluminium valve cover i got a while back. i finally found a guy who will blast the paint an corrosion off. i think his blaster is a real sand blaster, it uses glass particals. anyway, i need to get on that soon. i may have my valve cover done with powder coat paint. if i dont, what kind of paint did you use on your cover? looks really nice.
86LXItooFAST4me
06-15-2004, 12:55 PM
i hated that they were so short, i had to get my to stretch out just to fit. Those wires were crap in my opinion at least in quality mine just started to fall apart in the first week!

dont they fit fine with a header though? that little bit of extra spcae you get helps with some slack.
HostileJava
06-15-2004, 01:58 PM
dont they fit fine with a header though? that little bit of extra spcae you get helps with some slack.

Mine fit fine, there was just no slack.
86LXItooFAST4me
06-15-2004, 02:04 PM
Mine fit fine, there was just no slack.

you mean the header didnt give the wires any extra room? huh, that sucks.
BITESIZE
06-15-2004, 02:13 PM
Those are way too short, and don't look that great in my opinion
PortugalFocus
06-15-2004, 03:25 PM
they are def a good quality set of wires but they are short. Well at least they'll never touch the manifold.
SharkyX
06-15-2004, 04:43 PM
I used some red high temp paint for the valve cover, it was sand blasted, primes, sanded, sprayed twice, then clear coat applied and backed in my oven for a bit and dropped back on. I do with the wires were a lil longer but these are some of the only red ones i could find and i got them for $30 shipped form a 3geez member so i wasnt complaing, on top of that i feel that extra 100 HP they give me! LOL
ivanfbi
06-15-2004, 10:52 PM
I used some red high temp paint for the valve cover, it was sand blasted, primes, sanded, sprayed twice, then clear coat applied and backed in my oven for a bit and dropped back on. I do with the wires were a lil longer but these are some of the only red ones i could find and i got them for $30 shipped form a 3geez member so i wasnt complaing, on top of that i feel that extra 100 HP they give me! LOL
of what painted valve cover and wires? DAMN, I should paint my valve cover and beat the ass of my friends MX-6... LOL :rofl: