PDA

View Full Version : Muffler



LX-i BOY
06-18-2004, 11:02 AM
sorry i messed up on the post well what i wanted to know is everyones opinion on which of these 2 mufflers i should get this one
http://www.ptuning.com/html/Item-Desc.cfm?PartNo=PTMF14804&MakeCode=%2Dall&ModelCode=model&ModelYear=All&ModelDesc=Universal%20Fit
or this one
http://www.ptuning.com/html/Item-Desc.cfm?PartNo=PTMF14832&MakeCode=%2Dall&ModelCode=model&ModelYear=All&ModelDesc=Universal%20Fit
thanks for the help in advance

also if you think i should get the dual tip one which tip size 2.5 inch or 3inch, and do you think i should keep my resonator with either muffler

LX-i BOY
06-18-2004, 11:04 AM

Vinny
06-18-2004, 11:12 AM
I like the dual tip but I can not tand the single huge outlet on the other one

HostileJava
06-18-2004, 12:03 PM
I already told you on aim man, the dual square 2.5 tips look the best.

offthahook
06-18-2004, 12:05 PM
I like the dual tip but I can not tand the single huge outlet on the other one

:werd:

ivanfbi
06-18-2004, 12:20 PM
OMFG, that is expensive. But I like the dual one, and one more word, you need 2.5 and lower inlet on muffler.

LX-i BOY
06-18-2004, 12:33 PM
ivanfbi what do you mean lower inlet on muffler can you explain that to me? also i am assuming when you said i need 2.5 is the tip size right? thanks
josh

88accordhb
06-18-2004, 12:34 PM
the second one looks sicker.

blazin3gen
06-18-2004, 05:49 PM
yea i like the 2nd one the best cept the tips kinda big heh

ivanfbi
06-19-2004, 05:54 AM
No, inlet is where you connect the muffler to the exhaust pipes, there is a short pipe going from the muffler, about 3" long and diametr of this pipe can vary from 2" up to 3" you need 2.25" or 2.5" diametr, but not 3", cuz the muffler inlet will be too wide for stock pipes. Also, if you want a nice muffler for about 3 times cheaper, check ebay.

LX-i BOY
06-20-2004, 08:34 AM
bump i want a couple more opinions, and ivanfbi i don't know where you got the 3inch inlet from thats a choice of a tip size but the inlet is 2.25inches on both mufflers.
late

88accordalltheway
06-20-2004, 08:40 AM
get the square tip one, it will look better with the car being a boxy type car.

AccordArizona89
06-20-2004, 09:44 AM
dont get that rain catcher.

buzzbomber88lx
06-20-2004, 10:41 AM
the tip on the second one is way too damn big and square tips are the shit....I'm putting dual DTM's on mine and they are cool as hell sounding

Rendon LX-i
06-20-2004, 12:22 PM
I would got with the Dual but I also like the Single. I would go with the Dual give your car more of a boxy look.

HondaBoy
06-20-2004, 01:47 PM
IMO, i think that the "DTM" styled mufflers look like shit on a 3gee, actally i think on anycar. if you HAVE TO pick between the 2 mufflers shown, i'd say the 2nd one. and personally, id say have one on both sides for a dual exhaust look. if you like the look of a dual tip muffler, i would say dont go with ones that have the turned up tips. go with something with a very slight angle cut tip or a strait cut tip to look clean an not like the unfortunate stereo type of most tuner cars. i'm going with dual tip's on both sides, havent made the choice on which tip's to go with. i want dual tip's though, one on the left, and one on the right. and before that kind of hidden a flow master. i'll probley use a something in the line of a 20in-30in glass pack resinator for a smooth and somewhat quiet non-fart like sound.