PDA

View Full Version : wire harness



89BadBoy
06-22-2004, 06:21 PM
i was wondering if a lx, wire harness will fit on a dx? i'm not doing a swap or anything, i just need to replace the harness.
~
~
~
~
~
~
~
and to the moderators, is there a way the webtv ip address can be unbanned? i use this site alot and since webtv is all on the same ip i cant view alot of stuff.
Thanks mike

zero.counter
06-22-2004, 06:33 PM
No, alot of the electronics are different. But if you took the time to splice out everything not needed, it would be possible. But as a straight shot, no. :(

shepherd79
06-22-2004, 06:59 PM
LX and DX were carbed, so the harnesses are almost identical. if you want to replace engine harness, 100% identical, except the AC part.
the harnesses are backward compatible except the EFI.
so, yeah you can change the LX harness on dx accord with no problem.
if you are going to change the cabin harness, than you may as well get the power windows and power locks stuff, since LX had all that stuff.
if you have more questions, feel free to IM me.

zero.counter
06-22-2004, 07:06 PM
100% identical, except the AC part.
so, yeah you can change the LX harness on dx accord with no problem.
if you are going to change the cabin harness, than you may as well get the power windows and power locks stuff, since LX had all that stuff.
if you have more questions, feel free to IM me.
Hence, alot of the electronics are different....But as a straight shot, no. :D