View Full Version : How to advance timing II
LX-biker
07-22-2002, 02:36 PM
Hi,
I made experiments with timing adjustment by pinging like suggest "shepherd 79" in the thread reply.
Finaly I made max. advance and can't hear pinging. I am using 91 gas (premium or Gold). I hear such pinging on winter some time when drove car with cold engine.
Is it OK? No pinging but acceleration is better!
A20A1
07-22-2002, 05:49 PM
yup
shepherd79
07-22-2002, 05:52 PM
hey hey, sounds like you did good job on it.
LX-biker
07-22-2002, 07:25 PM
Thanks!
I did just basics:
-spark plugs/wires, coil
-pcv
-carb. rebuild
-mixture
-few broken vac lines and valve
-valve ajustment
-new alternator and battery
Wow! I did that?!
Ones more.
Today in evening, just few houres ago I changed Igniter. I had it from my last visit to junk yard 8 monthes ago. Adn GUESS! Bad idle (remember iDLe IdLE IIIIDDDLLLEEeeeeee!!!) Gone!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Like a miracle! Good and Smooth acceleration, tight brakes and smooooooooooooooth idle!
Guys, know what? Check ingiter first if you have low rpm and idle related problems. For breakfast.
Coil and other distributors -for lunch!
I think Igniter placed to distributer body can be likely overheated and even maded by NEC (big authority in electronics) have time to die, even not immideately. Not piece of wire like spark plugs.
:smokin:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.