PDA

View Full Version : bad clutch/ good clutch **PICS**


racerx
08-08-2004, 07:28 AM
well, i pulled the tranny apart from the motor and here's what I found:

http://memimage.cardomain.com/member_images/6/web/558000-558999/558113_26_full.jpg
*GASP!* you say. I said the same thing...
the flywheel was in the same condition as the pressure plate...


Here's the flywheel after resurfacing, the new clutch, and the new pressure plate. Made by exedy. $195 for everything.
http://memimage.cardomain.com/member_images/6/web/558000-558999/558113_27_full.jpg
shepherd79
08-08-2004, 07:55 AM
looking good
AccordEpicenter
08-08-2004, 08:09 AM
what the hell is that flywheel from? Yeah... my clutch was worse than that in my 95 lx... damn car barely moved at all.
racerx
08-08-2004, 08:13 AM
oh, this is all from my 91 prelude Si. I just thought everyone here might be interested.

i hope this will be a source of rekindled power. i decided to go with exedy instead of OEM since i'm swapping in the B20A anyway. might as well do it right the first time.

so, on a bad clutch, would there be any loss in power? or would it just be slower to connect?
Slavic
08-08-2004, 08:28 AM
so, on a bad clutch, would there be any loss in power? or would it just be slower to connect?Mine wouldn't go over 50 when the clutch was bad.
my clutch was worse than that in my 95 lx... damn car barely moved at all. So, yeah there's most definitely loss in power.
johndej
08-08-2004, 09:28 AM
lol, my clutch was fucked up more then that when it was pulled. see, one of those 4 springs had collapsed and fallen out and would poke out into the pressure plate.
thegreatdane
08-08-2004, 01:49 PM
lol, my clutch was fucked up more then that when it was pulled. see, one of those 4 springs had collapsed and fallen out and would poke out into the pressure plate.

Yea, me too :) Along with some metal pieces..
racerx
08-08-2004, 03:12 PM
greatdane, what is that bagde from? (the EX-2.0i 4wALB)
AccordEpicenter
08-08-2004, 06:05 PM
exedy is oem... Yeah i was gonna say because there is no way in hell that that flywheel is from an a20 lol
Oyvind Ryeng
08-08-2004, 06:31 PM
So the material in the friction disk is organic, just like the OEM one? And does that pressure plate increase the clamping pressure?
thegreatdane
08-09-2004, 12:26 AM
greatdane, what is that bagde from? (the EX-2.0i 4wALB)

That's from my previous Accord. I think there's some pictures of it somewhere on this board. It was equipped with 4wheel ALB.