PDA

View Full Version : Mazda RX7 MK1 Carb?


Civvy
09-17-2004, 07:59 PM
Basically as was at the yard a month ago and seen its carb and its rather big has 4 chokes!! and by the looks of what u guys are acheiving with the stock manifold I am wondering if it'll fit!

I suppose my question is does anyone know what type the RX7 carb is? I've been checking out Mazda websites and stuff but they only give engine size's ...so far.

Its needs the big square bottom to fit.
A20A1
09-17-2004, 08:11 PM
Is it a 4bbl? there are 4bbl conversions for the RX-7 It could be a holley.
Civvy
09-17-2004, 08:37 PM
cool i'll get it nxt time i'm up north then! any idea's how it'd compare to the 38/38dgv i was planning on. better or worse??
A20A1
09-17-2004, 09:06 PM
Umm well if you're going 4bbl you need to make sure the carb isn't too big and also you need an adapter on the manifold like the one in the link below.
http://www.3geez.com/showthread.php?t=37554


:D
shepherd79
09-18-2004, 03:57 AM
even if you get that carb, you still have to figure out how to mount it to the intake manifold.
Civvy
09-18-2004, 10:32 AM
even if you get that carb, you still have to figure out how to mount it to the intake manifold.

Custom is my Forte, if one person says it can be done and four others say No, I am instantly intrigued!
POS carb
09-20-2004, 08:06 AM
the Mr Gasket 4-to-2 bbl adapter fits to the weber adapters with very minimal grinding to the mounting holes but hood clearance would probably be your biggest enemy