how to make wires turn with a steering wheel...

[hondamanlxi]

i recently got a pilot steering wheel with the 2 red 'horn' buttons. Im using those for my purge and spray, so i have three wires running out of column cover and hanging with enough slack to allow me to turn the wheel... theres got to be a right way to do this.......


best pic i could come up with! Mines flat on the bottom

[NXRacer]

pic link is bad.

you should be able to hook them up to the hub that allows the horn buttons on the stock wheel to work i imagine. . . . . .

[hondamanlxi]

that works to finish the circuit by appling a ground. This must have external wires running thru/from it b/c its finishing a power-switch-nitro or power-switch-purge.

you follow?

[shepherd79]

you should have kept the stock steering wheel. you can rewire the cruise control buttons to spray and purge.

[hondamanlxi]

thanks for deleting my double post shepherd!

have you seen my interior? its all custom and then you see a busted ass stock wheel

form>function this time

that and i couldnt find push-buttons anywhere! so i had to use something...