PDA

View Full Version : 2nd gen prelude arms don't fit



AZmike
07-29-2002, 11:25 PM
I just pulled my upper control arms off. I had bought new prelude ball joints, pulled a pair of prelude arms, cleaned, gleased and reassembled the arms. Just now I noticed that the distance between the two studs is shorter on the prelude arms.
:mad:

I'm planning to use the arm pivot bolt from the Accord and some washers to get the length closer to correct. I was under the impression that this was an easy swap and everything would fit the same way. I'm sure that the arms are from a 2nd generation prelude.

Why won't it fit as is?:confused:

89accordhb
07-29-2002, 11:46 PM
Correct. You will need the use the stud off the accord arm with 2 1/8" washers on each arm to make it fit correctly.

AZmike
07-29-2002, 11:57 PM
Thanks for the quick reply. Hopefully I've got some laying around and I won't have to find out where to get washers at 1 in the morning.

MoonScryer
07-30-2002, 06:34 PM
look for a 24hr Home Depot (Atlanta has one :D ) or a super Wal-Mart.

pimp86LX
07-30-2002, 06:58 PM
your doin suspension work at 1am?

OldSchoolSwap
07-30-2002, 07:35 PM
Originally posted by pimp86LX
your doin suspension work at 1am?
All day everyday my man :D Its addicting ain't it? :super:

pimp86LX
07-30-2002, 08:44 PM
lucky..if i went out around here at 1am i'd get shot or sumthin

jigga225
07-30-2002, 08:48 PM
do research before you jump in the water

AZmike
07-31-2002, 09:14 AM
I found some 1/8" washers laying around. I ended up needing 3 for each side before the arms would slide in nicely. I was working at 1 am since it's only warm at night instead of burn-yourself-touching-the-car hot like it is during the day here in Phoenix.

Jims 86LXI HB
07-31-2002, 10:13 AM
Originally posted by 89LXi4dr
I found some 1/8" washers laying around. I ended up needing 3 for each side before the arms would slide in nicely. I was working at 1 am since it's only warm at night instead of burn-yourself-touching-the-car hot like it is during the day here in Phoenix.

Brother, I know what your talking about with the heat, not as bad here, but it sure can be.;)

accordlx
07-31-2002, 01:37 PM
I'm in Ohio and have given up working on cars during the daytime. It's like a blast furnace around here when the wind blows in the shade.

pimp86LX
07-31-2002, 04:30 PM
heh heh you should come here, its effin freezing compared to the souther U.S.