PDA

View Full Version : My next upgrade



OldSchoolSwap
08-01-2002, 05:00 AM
Rear camber kit from Ingalls.

http://www.ingallseng.com/parts/3862.jpg

http://www.mmrusa.com/Merchant2/graphics/00000001/3862.jpg

MiGeY
08-01-2002, 09:36 AM
Cool how much do those go for?

Btw you need those if you lower your car more than 1.5" right?

OldSchoolSwap
08-01-2002, 01:14 PM
Originally posted by MiGeY
Cool how much do those go for?

Btw you need those if you lower your car more than 1.5" right?
They run about $125 for both rears, without balljoints. Yes this must be installed if you lower the car or you'll end up with camber problems.

My suspensions in the rear had plates that extended the arms out further to correct the camber. But this is a better looking and more proffesional look. Also comes with uretherane bushings if i'm not mistaken.

guaynabo89
08-01-2002, 05:00 PM
Make sure they have retainers for the bushings or they'll slide out of the housing.:(

GreenMachine
08-01-2002, 05:42 PM
You Don't NEED those for the camber in the back, you could use spacers and longer bolts to adjust the camber, but if your not slamming the car the camber shouldn't be that bad. But hey thats just my pinion :D

GreenMachine
08-01-2002, 06:06 PM
Mis read mybad .. Those are pretty cool looking and definetly make it look pretty profesional . Espaecailly cool if you took your car to the track.

OldSchoolSwap
08-01-2002, 09:35 PM
Originally posted by GreenMachine
You Don't NEED those for the camber in the back, you could use spacers and longer bolts to adjust the camber, but if your not slamming the car the camber shouldn't be that bad. But hey thats just my pinion :D
I don't think you red my post. I am using the spacers that you mentioned. I just want a better install, rather than a rigg!;)

GreenMachine
08-04-2002, 06:47 PM
Yup ! that why I said " misread my bad. "

:)

OldSchoolSwap
08-05-2002, 11:37 AM
Originally posted by GreenMachine
Yup ! that why I said " misread my bad. "

:)
No prob! :D