Log in

View Full Version : Ground Control Koni adapters


EricW
02-14-2005, 09:22 PM
I thought I would post the pics of the koni adapters to turn the koni's in to full bodied coilovers since I have never seen them on here before and only could find one mention of them and so everyone else would know what they looked like.

http://memimage.cardomain.net/member_images/1/web/673000-673999/673064_44_full.jpg

http://memimage.cardomain.net/member_images/1/web/673000-673999/673064_48_full.jpg

http://memimage.cardomain.net/member_images/1/web/673000-673999/673064_45_full.jpg

http://memimage.cardomain.net/member_images/1/web/673000-673999/673064_46_full.jpg http://memimage.cardomain.net/member_images/1/web/673000-673999/673064_47_full.jpg

If you order your Ground Controls new and tell them what type of shock/strut you are using they will provide any other parts like these that will fit your shocks. Since i got mine used I had to order them seperatly.
EricW
02-14-2005, 09:57 PM
oops!
YK86
02-17-2005, 01:51 AM
Sweet! Never seen those before. Mind if I ask what the part number is?
EricW
02-17-2005, 05:23 AM
There is not a part number on the part or the packing slip or the instructions. But the instructions they sent me were for a 90+ accord. They were $25 dollers each my order was $115 with 3 day shipping. I just called ground control and talked to the guy on the phone and told him what i was looking for and he looked them up. I had emailed them first but the guy said it would be better to call and talk to Ben but when i called he was on lunch. Hope this helps.
YK86
02-18-2005, 12:02 AM
Thanks for the info. I might be interested in the future.
NXRacer
02-18-2005, 12:08 AM
thats freakin tight! and Koni will revalve their struts just like bilstein(sp).

one question tho, what holds the perch to the strut body??
EricW
02-18-2005, 05:04 AM
one question tho, what holds the perch to the strut body??

The perch has a small black ring inside that sits right on the snap ring. The black piece has a small notch all the way around so it covers the ring just barely.

Heres a pic (you can see the small black ring on the two in the middle)
http://memimage.cardomain.net/member_images/1/web/673000-673999/673064_49_full.jpg

I put them on yesterday as long with doing the to rear ball joints. I started at 4:30 and got finished about 12.

*edit* well car domain is having problems heres the page the pic is on, it is the one on the very bottom of all the coilover pics. www.cardomain.com/memberpage/673064/3