Name that hose...

[jigga225]

Whas up fellas,
I finally found one of by major oil leaks... it's coming from this hose, but i dont know where I can buy it... Or what the name is...
so when i call autozone, what kinda hose should I ask for??? here's the pix
http://img.photobucket.com/albums/v620/jigga225/PDR_0544.jpg

http://img.photobucket.com/albums/v620/jigga225/oilhose.jpg
thx for the help/
Peace!

[86LXItooFAST4me]

that be the PCV, i think :D

[HostileJava]

Damn, that's kinda blurry and close, it looks like it's going to the oil pan? But I'm not sure, can you get any further back and sharper?

[shepherd79]

http://www.hondaautomotiveparts.com/catimgs/13SE00_A05.gif
hose number 3.
it is connected from PCV box to oil pan. you can only get them from honda dealer. if you try to match it, it won't work trust me. been there done that.
just get one from majestic. it is $16.96

[jigga225]

yep sheperd, that's it....
i just went out and took it off, and i was going to try to goto autozone and match it.. but i'll take your word for it and order one.

['89AccordLX(Rus)]

I'll second Shepherd's opinion, that hose is metric and can't be matched up at the stores.

Part number: 11854-PC6-010

[danronian]

That and the pan gasket are the major leak problems on mine also. Mine doesn't have any holes in the hose so I think I am going to just try taking it off cleaning it inside and where it is clamped on and then use some screw-tighten clamps to possibly get it not to leak, I think the PCV got clogged and that was just the first thing to blow-out b/c of ring blow-by pressure in the crankcase, by car only burns/leaks 1/2gt of oil per 3k mi. so blow-by isn't a major issue but is none-the-less a part of life b/c the car does have 172K mi on it.

[danronian]

Did anyone ever try just using better clamps on this hose after they cleaned it up instead of replacing it? (in my head I think it will work, after I clean out that junction box and seal any leaks in that first)