90 accord short ram

[89HondaLxi]

iight i searched and couldnt find nething will thishttp://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=38634&item=7961613713&rd=1&ssPageName=WDVW fit my 89 lxi

[SteveDX89]

Looks like the bend would put the filter right where our battery is. Search the board for short rams. A lot of people have used Civic and Integra intakes. See which short ram is the most popular.

[AccordNut]

just go with a 90-93 integra cold air intake, it seems alot of guys on here have had success with that. Im gonna order one soon myself

[danronian]

just go with a 90-93 integra cold air intake, it seems alot of guys on here have had success with that. Im gonna order one soon myself
I just got a 90-93 CAI off ebay for less than $40 shipped and installed it in about an hour, real easy if you have a hacksaw, then again any intake you buy will need to be cut, that is other than the overpriced weapon R. The 92-95 civic/delsol short ram fits fine also, but it needs to be cut a few inches to clear the battery, you'll also need to make a bracket so it doesn't ram into your brake lines.

[2drSE-i]

just so we are clear, when you say CAI you mean one that bends all the way to sit in the front passengers corner, or am i mistaken?

[Ace]

I just installed mine I only used one pipe of the cai and it fits fine will install the whole pipe once I get a bypass valve ebay intakes are great just pick up a k+n filter

[88accordhb]

CAI goes all the way down pass the battery into the bumper.

[AccordNut]

ace you got the 90-93 accord cai right? only one of the pipes gives you cai in the 3g?

[88accordhb]

no 90-93 integra works too. the integra one, the bends are more of a right angle. i'd get the 90-93 accord ones, less bends and technically more air flow. but the integ ones looks better in the bay.

[AccordNut]

so all 90-93 teg ones have a 90 degree angle? and dont they have to be cut a bit...i just bought one on ebay but i think those pics they use are misleading

[Ace]

Yea after buying you'd probaly be better with the teg one I will have to modify the pipe for the cai mines only a short ram will post pics soon

[danronian]

The teg one will have to be cut a few inches at least, do a search and everyone says the same thing. There is also at least 2 how-to threads about where to cut it. But it is so simple, you just look at it and know.

[88accordhb]

as far as i kno, the teg one, the pimp out of the tb will need to be cut a few, the one goin down into the bumper will need to be cut a few inches also so that the filter can lay inside.