biggene
05-02-2005, 06:45 AM
Ok,
I replaced my timing belt last weekend, and adjusted my valves yesterday morning. When I took the plugs out (makes it easier to turn the engine over), my #3 plugs ceramic crumbled in my hand from around the electrode. I replaced the plug with an exact duplicate from advance, and now the thing runs like shite. It wont hardly idle at all and misses when under acceleration. I personally think its the plug wire for that cylinder, but just wanted to ask if anyone had any other ideas for this issue.
I am going to replace that wire at lunch and will repost if there is any difference.
TIA,
Biggene
I replaced my timing belt last weekend, and adjusted my valves yesterday morning. When I took the plugs out (makes it easier to turn the engine over), my #3 plugs ceramic crumbled in my hand from around the electrode. I replaced the plug with an exact duplicate from advance, and now the thing runs like shite. It wont hardly idle at all and misses when under acceleration. I personally think its the plug wire for that cylinder, but just wanted to ask if anyone had any other ideas for this issue.
I am going to replace that wire at lunch and will repost if there is any difference.
TIA,
Biggene